Author Topic: Getting ready for a tech  (Read 17721 times)

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Getting ready for a tech
« Reply #45 on: September 29, 2013, 11:07:15 PM »
Oh and I did not touch the wires. That looks scary! I remember the old Jav was just 2 airlines and that was it. I could figure out 2 air lines but this Gauntlet no thanks I will not try and mees with that.


Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Getting ready for a tech
« Reply #46 on: October 01, 2013, 08:20:16 PM »
I just realized I don't have squeegee/floodbar clamps! Anybody got 32 of these laying around? Or is this something a tech may have in his "stock"?

Offline GaryG

  • !!!
  • Hero Member
  • *****
  • Posts: 750
Re: Getting ready for a tech
« Reply #47 on: October 01, 2013, 09:04:56 PM »

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Getting ready for a tech
« Reply #48 on: October 01, 2013, 09:25:17 PM »
Was that not included in the deal?

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Getting ready for a tech
« Reply #49 on: October 01, 2013, 09:33:40 PM »
I don't really think so. Rich did an awesome thing for us with this and has gone above and beyond what I expected so im not gonna push the issue. I may need to borrow some from someone local just so the tech can do his thing.

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: Getting ready for a tech
« Reply #50 on: October 02, 2013, 02:47:29 AM »
I don't really think so. Rich did an awesome thing for us with this and has gone above and beyond what I expected so im not gonna push the issue. I may need to borrow some from someone local just so the tech can do his thing.
did not know they were not sent with the press to us when it was traded in. Is your install being done by our tech and if so when?
Rich Hoffman

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Getting ready for a tech
« Reply #51 on: October 02, 2013, 06:28:19 AM »
Try Brannon or Scot at Spotcolor Supply. I unloaded a boatload of surplus stuff to them. Also floodbars and squeegee holders.

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Getting ready for a tech
« Reply #52 on: October 02, 2013, 10:18:19 AM »
I don't really think so. Rich did an awesome thing for us with this and has gone above and beyond what I expected so im not gonna push the issue. I may need to borrow some from someone local just so the tech can do his thing.
did not know they were not sent with the press to us when it was traded in. Is your install being done by our tech and if so when?
Yes your tech is scheduled for this Monday.

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: Getting ready for a tech
« Reply #53 on: October 02, 2013, 10:40:01 AM »
I don't really think so. Rich did an awesome thing for us with this and has gone above and beyond what I expected so im not gonna push the issue. I may need to borrow some from someone local just so the tech can do his thing.
did not know they were not sent with the press to us when it was traded in. Is your install being done by our tech and if so when?
Yes your tech is scheduled for this Monday.
clamps will be there by the time our tech arrives.
Rich Hoffman

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Getting ready for a tech
« Reply #54 on: October 02, 2013, 10:42:35 AM »
Awesome! Thanks again Rich

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: Getting ready for a tech
« Reply #55 on: October 02, 2013, 10:54:39 AM »
Can you say SERVICE?
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: Getting ready for a tech
« Reply #56 on: October 02, 2013, 11:01:46 AM »
Just another reason M&R rocks. 
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: Getting ready for a tech
« Reply #57 on: October 02, 2013, 11:41:35 AM »
that is the reason they Rock Brandt. 

blue through and through here

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Getting ready for a tech
« Reply #58 on: October 08, 2013, 05:55:51 PM »
The tech is registering the press as we speak but the poor guy has a cavity and needs a root canal and you can tell its wearing on him. His dentist can't get him in. Its taking longer than I thought, I don't know if it's cause he is in pain or if he isn't completely familiar with the press.

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Getting ready for a tech
« Reply #59 on: October 08, 2013, 05:57:28 PM »
Registering a press is a toothache in itself.

Take notes Gerry.