« previous next »
Pages: [1]   Go Down

Author Topic: How would you print this...?  (Read 1620 times)

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
How would you print this...?
« on: July 19, 2013, 03:29:38 PM »
...or rather, what screen mesh and print sequence would you have used if this job was being printed on your press..
Shirts are for a local brewery...

the actual colors (hard to tell from the photo) are: under base, light green, medium green, dark green, hi lite white, black.

we were smart mesh 150/48 for base, and 156 for all top colors. Shur-Locs.

Thanks. John
Logged

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: How would you print this...?
« Reply #1 on: July 19, 2013, 05:52:02 PM »
Ideally...

Black - Dk Green - UB White - Flash - Light Green - HiLite White

Not seeing the medium green?...or maybe I just have a six color mind.
Logged

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: How would you print this...?
« Reply #2 on: July 19, 2013, 07:18:50 PM »
Probably, Base, flash, Light Green, Med Green, Dark Green, Hilite White, flash, Black.

Base on a 156 or 180 S all other on 200-230 S.
Logged
Wishin' I was Fishin'

Offline Evo

  • Hero Member
  • *****
  • Posts: 958
  • Anything is possible.
Re: How would you print this...?
« Reply #3 on: July 28, 2013, 01:50:29 PM »
Butt registered, no underbase, with waterbase inks:

black
dark green
medium green
discharge light green
discharge white
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: How would you print this...?
« Reply #4 on: July 29, 2013, 01:11:07 PM »
Would tie dye discharge consistently?
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: How would you print this...?
« Reply #5 on: July 29, 2013, 01:13:46 PM »
Not unlike regular old shirts, tie dye discharging will depend on the dyes and colors used.
Logged

Offline Grumpy Ole Artist

  • Full Member
  • ***
  • Posts: 131
  • Eschew obfuscation
Re: How would you print this...?
« Reply #6 on: July 29, 2013, 01:37:50 PM »
Cool, but potentially litigious...last I heard, Ted Turner had some very serious people working on those fun folks' licensing... just sayin!    ;)
Logged
Humor is the unexpected juxtaposition of incongruities.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: How would you print this...?
« Reply #7 on: July 29, 2013, 03:44:13 PM »
Quote from: ebscreen on July 29, 2013, 01:13:46 PM
Not unlike regular old shirts, tie dye discharging will depend on the dyes and colors used.

Makes sense.  We've defaulted to low bleed plasti on tie dyes just for safety's sake, those suckers are expensive and I'd hate to lose a batch to dye migration.
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How would you print this...?
« Reply #8 on: July 29, 2013, 09:53:19 PM »
Have you actually had issues?
Almost all commercial (and good hobby) tie dye is done with the Procion dyes, and I haven't had bleed problems.
Logged
That rug really tied the room together, did it not?

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Re: How would you print this...?
« Reply #9 on: July 30, 2013, 08:43:21 AM »
Hi Guys..

We ran the job without episode. Regular plastisol. Finished shirts were really nice.
Slightly more hand then I would have preferred, but printing across a variety of tie dye colors
necessitated  a good base. We opted out of discharge base because they were dyed, and didn't want
any snags mid run. Just trying to figure out how we could have printed these to minimize hand.

Thanks for the input.

John
Logged

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Re: How would you print this...?
« Reply #10 on: July 30, 2013, 10:35:03 AM »
Quote from: Frog on July 29, 2013, 09:53:19 PM
Have you actually had issues?
Almost all commercial (and good hobby) tie dye is done with the Procion dyes, and I haven't had bleed problems.

you know I think I'm going to have to test the next time we have them in the shop. I've just been assuming.
Logged
Pages: [1]   Go Up
« previous next »