Author Topic: Printing Plackets on an Auto?  (Read 5109 times)

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Printing Plackets on an Auto?
« on: March 26, 2013, 04:02:18 PM »
Ok I want to print some plackets on my auto, How do you guys do it, and now here is my dumb idea of using what I got, I thinking about cutting a slot in one of my old squeegees and a matching slot in on of my old flood bars to move over the buttons.  I thought about cutting them down to half, but the choppers pressure would be half cocked...trying to do this without doing anything to pallets.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!


Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Printing Plackets on an Auto?
« Reply #1 on: March 26, 2013, 04:10:41 PM »
Sleeve pallets unless you need to print both sides. If you do, cut a squeegee but
you shouldn't need to cut floodbars unless there's something I don't know about
Anatol's.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Printing Plackets on an Auto?
« Reply #2 on: March 26, 2013, 04:19:23 PM »
Ebscreen, I don't have sleeve pallets( would like to have some), I want to try and work with the pallets I have now and the reason I want to cut a slot in the flood bar is the flood bar would catch on the buttons same as the squeegee would do.  With the slots I thinking you could print plackets on a flat pallet as you would a teeshirt.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Printing Plackets on an Auto?
« Reply #3 on: March 26, 2013, 04:27:34 PM »
I had thought most machines flood with the tables down leaving clearance for a placket.
That's what I get for assuming!

Stranger things have been done, but that's gonna be real hard on your mesh.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Printing Plackets on an Auto?
« Reply #4 on: March 26, 2013, 04:36:37 PM »
Ebscreen your right!!!!! I was thinking way to dam much....I'm good I'll cut the slot on squeegee and use a not so tight screen... might work might not or it's back to the manual press.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline T Shirt1

  • !!!
  • Full Member
  • ***
  • Posts: 225
Re: Printing Plackets on an Auto?
« Reply #5 on: March 26, 2013, 04:50:20 PM »
Or cut the area for the placket out of an old platen. 
steve

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Printing Plackets on an Auto?
« Reply #6 on: March 26, 2013, 04:53:42 PM »
Or, if it's easy to raise your off contact, build up the area next to the high seams and buttons.
I have pieces of dense foam sheets and neoprene and such for these and other problem garments.
That rug really tied the room together, did it not?

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Printing Plackets on an Auto?
« Reply #7 on: March 26, 2013, 05:15:40 PM »
I cut a slot in my squeegee a 70 duro and low and behold it's working, the screen is about a 13 to 14 newton screen and I put blue tape down the middle to keep the buttons from wearing on the screen...the sample prints look great!!! this will work for now until I get the correct set up.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Parker 1

  • Sr. Member
  • ****
  • Posts: 473
Re: Printing Plackets on an Auto?
« Reply #8 on: March 26, 2013, 05:16:58 PM »
Or, if it's easy to raise your off contact, build up the area next to the high seams and buttons.
I have pieces of dense foam sheets and neoprene and such for these and other problem garments.

I like this idea.  I've seen printers do this for full and 1/4 zip hoodies and pull-overs.

Offline prozyan

  • Hero Member
  • *****
  • Posts: 510
Re: Printing Plackets on an Auto?
« Reply #9 on: March 26, 2013, 06:03:19 PM »
I  too  notched a squeegee  for this purpose.   Works  great.
If Barbie is so popular, why do you have to buy her friends?

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Printing Plackets on an Auto?
« Reply #10 on: March 26, 2013, 06:10:07 PM »
Frog the only problem I have with that is, I'd have to do that on eight pallets, but some thing to think about and build to slap on the pallets when I'm doing plackets.  What I did today worked out fine for this job.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Printing Plackets on an Auto?
« Reply #11 on: March 26, 2013, 06:56:55 PM »
I'm just a little concerned of a break-through from the buttons, even with a short squeegee. Run some tape there for a little reinforcement.
That rug really tied the room together, did it not?

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Printing Plackets on an Auto?
« Reply #12 on: March 26, 2013, 09:59:07 PM »
We have had the buttons pop a screen. But that was before we cut a squeegee like you guys are talking about.  As far as flooding,  we just put a mess if ink in and raised the flood bar. I kind of remember somewhere that made specialty squeegee and flood bar for this, probably Action.
The sleeve boards are a good idea also, never thought of that. We actually have 4 (if I remember correctly) extra sleeve boards for anatol, if you are interested. Probably let them go for a song....

Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Printing Plackets on an Auto?
« Reply #13 on: March 26, 2013, 10:17:03 PM »
Beat ya to that Frog, but thanks for the advice anyway,  printing plackets on my manual just takes to long since I only have one pallet set up for it, printing on the auto today took only a half hour.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Re: Printing Plackets on an Auto?
« Reply #14 on: March 28, 2013, 12:42:56 PM »
We tape a piece of cardboard on the back of the screen where the buttons hit and use a short squeegee