« previous next »
Pages: 1 [2]   Go Down

Author Topic: what mesh screens should I use for this  (Read 3910 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: what mesh screens should I use for this
« Reply #15 on: March 26, 2013, 01:12:09 PM »
Hmm we have two qtz flashes on each auto, first ones always in head three for flashing black (and other reasons)........never ever heard of this
Logged

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: what mesh screens should I use for this
« Reply #16 on: March 26, 2013, 01:17:10 PM »
Quote from: ebscreen on March 26, 2013, 01:08:41 PM
Quote from: Admiral on March 26, 2013, 12:16:40 PM
we don't do that ever because flashing black ink along with white would make the black burn through the shirt

might only be a quartz flash issue though

Say wha....?

On polyester, by the time white has flashed the black can have absorbed enough heat to melt the shirt. I have a few examples of this kicking around the shop.
Logged
Wishin' I was Fishin'

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: what mesh screens should I use for this
« Reply #17 on: March 26, 2013, 01:33:29 PM »
Wait, yep, %100 polyester, the Sportek ST700's, we had that happen a few weeks back.
Never seen it on cotton though. Both our presses have two heads before the flash station.
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: what mesh screens should I use for this
« Reply #18 on: March 26, 2013, 01:51:44 PM »
Ahhhh................don't print poly here.
Logged
Pages: 1 [2]   Go Up
« previous next »