What have you printed lately?

[Doug S]

Here is one from yesterday.  Thanks to Dan for the seps, the customer was happy

[Dottonedan]

Great looking print.  I like the color transitions. Smooth and good screens.

[Doug S]

Thanks Dan!  There is nothing like great seps and rollers with s mesh. 

[RICK STEFANICK]

Thanks Dan!  There is nothing like great seps and rollers with s mesh.

I like great sep's with Statics and regular chinese mesh. That's what we run

[SERJ]

Water based ,7 colours, mesh 120(305), 90Lpi.

[BP]

Very nice! is that 305-S mesh?

[SERJ]

yes

[SERJ]

3 colours, plastisol, mesh 120(305),90lp

[Rockers]

Thanks Dan!  There is nothing like great seps and rollers with s mesh.

I like great sep's with Statics and regular chinese mesh. That's what we run

How did you manage to end up with Chinese mesh. My experience with any thing screen print related from China is rather of the negative side of things. As a matter of fact I would almost say don`t buy anything of Alibaba especially not without trade assurance. I can`t recall a single order where things arrived either as described, not damaged or of such low quality that it didn`t even last for a year before breaking down.

[Maxie]

Serj kills in again, the wood grain of the guitars is amazing.
Serj, hope to see at Long Beach.

[Doug S]

Man, if I didn’t know better Serj I’d swear your screen prints look like DTG prints but much better.  Amazing

[SERJ]

Thanks. See you on the ISS

[Dottonedan]

Here is another photo race tee.  Again, 5 colors on black tee. (Not black ink).  We used a 305 mesh on the base. Yes, a 305 mesh.  280 on the top white. 305 on colors.  Yellow, red, blue.
65 lpi.   On this one, the thing is, I have a logo blue color I need to stick with (if I can), but I also have to achieve a good purple. So it's give and take. you have to decide what blue you can use to hit both targets...and also that will create all of the other areas needed (in the mixing). So I got the good logo blue, and got the good purple in the car. Overall, it has to leave a different cast to the photo/art/sand, but it works.  My yellow pretty much stays the same. PMS 102 or Lemmon yellow to some people whose RFU.  The red is known as a Drake red and is close to pms 185 red.  This blue, is more of a concoction. I usually refer to a pms 2995, 3005, or a process blue. TO lean towards better greens, I use more of a teal blue like pms 313. Not too much white in the blue's.

Super soft!

This I-Phone photo of the print is a tad more yellow than the print. The same is more “sand” colored.

Corrected orientation of photo.

[3Deep]

For a guy that is color blind you can blend color very good , nice print

[lancasterprinthouse]

For a guy that is color blind you can blend color very good , nice print

Stop. Hold up. You’re saying Dan is color blind? Is that serious or just a joke? If I find out he’s color blind and still manages to give me good seps every time I’ll have a whole new level of respect. The seps already work out with few minor or no tweaks which I can highly appreciate.


Sent from my iPhone using Tapatalk