« previous next »
Pages: 1 [2]   Go Down

Author Topic: It finally happened! After four years, our press was down.  (Read 5317 times)

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: It finally happened! After four years, our press was down.
« Reply #15 on: February 13, 2013, 03:59:14 PM »
Quote from: Sbrem on February 13, 2013, 03:44:48 PM
I watched one of my guys punch the touch screen one day... you should have seen the look on his face, "Of Fudge, what have I done?" Then he lied to me, until I told him I watched him do it. This was about 6 years ago, 3K then... he stayed with us (he was a good pressman) and we took the money out of his check every week until it was paid. Four days, no MHM, fortunately, no critical work and the '94 Gauntlet kept us moving...

Steve

just as an FYI, you can connect and external monitor and a mouse to the system to get back up and running. 'hopefully you don't have to, but it is a good piece of info to have!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: It finally happened! After four years, our press was down.
« Reply #16 on: February 13, 2013, 04:09:25 PM »
Not on the Hitachi PLC's Pierre.

Aren't yous guyses presses Linux based? Couldn't you just throw an AMD in there and call it good?
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7859
Re: It finally happened! After four years, our press was down.
« Reply #17 on: February 13, 2013, 04:39:35 PM »
just wondering, is it legal to take money from his check?  Not that destruction of property is legal either...better than the girl that quit(or was fired) and tossed a can of spray tack into a gas dryer.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: It finally happened! After four years, our press was down.
« Reply #18 on: February 13, 2013, 05:10:07 PM »
Quote from: ebscreen on February 13, 2013, 04:09:25 PM
Not on the Hitachi PLC's Pierre.

Aren't yous guyses presses Linux based? Couldn't you just throw an AMD in there and call it good?

they are linux based, but I don't know if the operating system is compiled for that particular board or is left with all the components on it. My guess is, they customized it for the LEX motherboard as the CF card with the OS is marked which revision of the press it works with.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: It finally happened! After four years, our press was down.
« Reply #19 on: February 13, 2013, 05:21:57 PM »
Rodney told me that the controller or the computer head part of the press is the same on all the presses. The software is on all of them to run each press e-type, S-type and 3000. The tech just has to unlock it or activate it. The multiprint program is also on all of them. He also told me the drive motor for the squeegee is the same on all the presses. I asked that because I wanted to run a larger squeegee and wanted to make sure it would not be too much for the motor. Of course this is all depending on the year of the press and what press was in the software loaded at the time. I know my press software was updated.
Logged

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: It finally happened! After four years, our press was down.
« Reply #20 on: February 13, 2013, 05:37:49 PM »
Quote from: blue moon on February 13, 2013, 05:10:07 PM
Quote from: ebscreen on February 13, 2013, 04:09:25 PM
Not on the Hitachi PLC's Pierre.

Aren't yous guyses presses Linux based? Couldn't you just throw an AMD in there and call it good?

they are linux based, but I don't know if the operating system is compiled for that particular board or is left with all the components on it. My guess is, they customized it for the LEX motherboard as the CF card with the OS is marked which revision of the press it works with.

pierre

The programming for the MHM's is done here in Atlanta.
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: It finally happened! After four years, our press was down.
« Reply #21 on: February 13, 2013, 06:19:37 PM »
Quote from: mk162 on February 13, 2013, 04:39:35 PM
just wondering, is it legal to take money from his check?  Not that destruction of property is legal either...better than the girl that quit(or was fired) and tossed a can of spray tack into a gas dryer.

Yes, it was all arranged through payroll. Essentially, he was billed for the portion not covered by insurance, around $1500, and it was deducted until paid. I think it was $100 per week. He did tattooing all night long, so he didn't hurt too much for money. He knew he did wrong, and was very willing to make amends, and we didn't really want to fire him, as we knew him socially long before we even had a shop. It worked out, one learns to forgive and move on.

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: It finally happened! After four years, our press was down.
« Reply #22 on: February 13, 2013, 06:38:24 PM »
Quote from: Printficient on February 13, 2013, 05:37:49 PM
Quote from: blue moon on February 13, 2013, 05:10:07 PM
Quote from: ebscreen on February 13, 2013, 04:09:25 PM
Not on the Hitachi PLC's Pierre.

Aren't yous guyses presses Linux based? Couldn't you just throw an AMD in there and call it good?

they are linux based, but I don't know if the operating system is compiled for that particular board or is left with all the components on it. My guess is, they customized it for the LEX motherboard as the CF card with the OS is marked which revision of the press it works with.

pierre

The programming for the MHM's is done here in Atlanta.

can you get me some more info on it? I'd like to see if it would be possible to install a different motherboard and still keep everything going.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: It finally happened! After four years, our press was down.
« Reply #23 on: February 13, 2013, 10:44:22 PM »
maybe they can update the software to run on a tablet.
Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: It finally happened! After four years, our press was down.
« Reply #24 on: February 21, 2013, 11:04:05 PM »
Pierre, could you still technically see the display just very dimly?

I'm sure you are well versed enough to know most times when the inverter is out you can still technically see the display... just EXTREMELY faintly and only when the light reflects just right (obviously there is NO backlight).
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: It finally happened! After four years, our press was down.
« Reply #25 on: February 22, 2013, 04:07:31 AM »
this was fixed and explained in another thread. It was the LCD, nothing wring with the inverter. Under the circumstances it might be hard to see the faint image if it was the inverter. LCD is mounted behind the touchscreen and recessed back. 'not sure there would be enough light to see the unlit image, but it's hard to tell.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!
Pages: 1 [2]   Go Up
« previous next »