Author Topic: How to print a slab of white  (Read 1164 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5675
How to print a slab of white
« on: January 15, 2013, 10:46:05 AM »
80% Sericol white 20% base. A little stiff but customer will wash before wearing. Literally couldn't walk away from the ink sucking screen.


Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: How to print a slab of white
« Reply #1 on: January 15, 2013, 11:04:44 AM »
That SUX!  I hate those kind of prints.
"We Make Blank Shirts Look Awesome!"

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: How to print a slab of white
« Reply #2 on: January 15, 2013, 11:12:21 AM »
Tony what mesh count and thread diameter was used for that print?
Dale Hoyal

Offline IntegrityShirts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1179
Re: How to print a slab of white
« Reply #3 on: January 15, 2013, 11:15:24 AM »
Woah, I JUST ran an almost identical job. 80% d-white 20% base cci.


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5675
Re: How to print a slab of white
« Reply #4 on: January 15, 2013, 11:22:27 AM »
110 no idea what thread. Low tension. No flash single hit. Much more cost efficient than plastisol

Offline T Shirt Farmer

  • Hero Member
  • *****
  • Posts: 837
Re: How to print a slab of white
« Reply #5 on: January 15, 2013, 11:35:34 AM »
Tony,

Why did you use the 20% base vs. 100% white ink?
Robert
allpremiums.com
Your Source for Decorated Apparel.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5675
Re: How to print a slab of white
« Reply #6 on: January 15, 2013, 11:50:12 AM »
Many have learned this softens it up a bit to take the chalkiness out. Some garments require 100% due to the fact the don't discharge as well however. Some make DCUBs with 80% base and 20% white!