« previous next »
Pages: [1]   Go Down

Author Topic: Pressure washer nozzles?  (Read 1393 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Pressure washer nozzles?
« on: December 06, 2012, 07:16:20 PM »
The adjustable on my Camspray 1500a just bit it but I'm having a hard time finding anything to replace that might be an upgrade.  It's all "turbo rotary" or whatever.

I like the adjustable- it's a fan spray and I use in a tighter pattern for reclaim, wide fan for resolving stencils.  An upgrade would be a quick change tip- one very even, wide fan for resolving, one tighter, more agressive for reclaim. 

It doesn't look like you can find the industrial tips at lowes/home depot. 
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Pressure washer nozzles?
« Reply #1 on: December 06, 2012, 07:28:23 PM »
our adjustable on the 1500a busted after only two weeks. The fixed angle quick clip has a much better patter (more even, cleaner flow), but about a year into it we are having problems with the quick disconnect being gunked up and not holding the tip any more (popped out twice now). We'll have to order another one and keep it clean from now on.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Pressure washer nozzles?
« Reply #2 on: December 06, 2012, 07:30:24 PM »
where did you get the fixed angle?
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Pressure washer nozzles?
« Reply #3 on: December 06, 2012, 07:32:35 PM »
camspray directly.
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Pressure washer nozzles?
« Reply #4 on: December 06, 2012, 08:39:47 PM »
I feel like an idiot, I can't find these anywhere on their site or online. 
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Pressure washer nozzles?
« Reply #5 on: December 07, 2012, 05:10:34 AM »
we talked to them on the phone. You want a quick coupler and fixed angle nozzles that go in them. I just checked the web site and did not see the nozzles on it, the did have the couplers. . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Pressure washer nozzles?
« Reply #6 on: December 07, 2012, 06:07:30 AM »
Northern Tool
Logged
Pages: [1]   Go Up
« previous next »