« previous next »
Pages: [1]   Go Down

Author Topic: FilmMaker V3 and ink pooling  (Read 1741 times)

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
FilmMaker V3 and ink pooling
« on: November 27, 2012, 09:15:54 AM »
I am running FM3 and I am getting ink pooling on the film.  I have tried turning down the max ink, all the way down to 5% and it hasn't affected the density at all.

Any ideas before I shell out $75 on a tech support call?
Logged

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: FilmMaker V3 and ink pooling
« Reply #1 on: November 27, 2012, 10:55:37 AM »
My version 2 does that occasionally and I choose the default and fixes itself. This is on erosion 1900
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: FilmMaker V3 and ink pooling
« Reply #2 on: November 27, 2012, 12:22:07 PM »
max ink does not do what you think it does. . .

the droplet size, resolution and percentage setting in the variable dot option are used to control the deposit. Call me and I'll walk you through the right settings . . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: FilmMaker V3 and ink pooling
« Reply #3 on: November 27, 2012, 01:19:48 PM »
Pierre got me up and running.  I was headed in the wrong direction.  The correct setting is under variable dot setup.  I was on Gray 3 @ 90% and I should have been on Gray 2 @ 90%.

Thanks pierre. 
Logged
Pages: [1]   Go Up
« previous next »