Roller Squeegee Video

[244]

well not quite, they use the press to flatten the garment, I would like to have that very device look more like my Geo. Knight 16 x 20 heat platten and hit the print (not the bare garment) to smooth and soften the post print, the underbase to prep it for overprinting, or just to kill fiberlation, or to nicely finish a print on any garmrnt...but the concept is kinda the same. even if I think they have it basasswords .
mooseman

We make what you are looking for. It is called the I- Kiss. Been out for a couple years.

[ericheartsu]

I'll be buying one on Tuesday to test it out.

[Action1]

I'll be buying one on Tuesday to test it out.

Fantastic. Thank you Eric.

[3Deep]

Eric I can see that roller being very useful in our shop allso, do you make it for Anatol? oh and another thing you ship out teflon sheets to tape to a screen why not just make a screen with the teflon sheet already attach at about 25 to 35 newtons or just sell a sheet big enough to use on a roller frame etc.  I might just have to try one of those rollers, good work guys.

Darryl

[Action1]

Eric I can see that roller being very useful in our shop allso, do you make it for Anatol? oh and another thing you ship out teflon sheets to tape to a screen why not just make a screen with the teflon sheet already attach at about 25 to 35 newtons or just sell a sheet big enough to use on a roller frame etc.  I might just have to try one of those rollers, good work guys.

Darryl

Daryl -

We stock the Teflon sheeting in a 24" wide roll and it can be sold by the foot. Teflon is very expensive - and it is our belief that only enough as necessary could be cost justified. If you think that the 24" wide material would work for you on a roller frame - let me know. we have some older material here that's 0.010" thick that would probably be better than the 0.020" material we use now.

In any event - thank you sincerely for your feedback and we look forward to your order.

[Screened Gear]

thinking we could make that for a quarter of the price. what a simple idea

Sweetts I think your right. For the DIY guys that don't have the $$$. See below HTC Roller stand. Just cut the stand part off and attach your mounting bracket. I'm sure its not as strong as Actions but for a smoothing or lint roller would do fine.

http://www.shopsmith.com/ownersite/catalog/swd_rollerstand.htm

[Action1]

Thank you to everyone for making this such a hot topic over the weekend. Orders came in for these all weekend and today and we are working to complete your requests as quickly as possible. Please place your orders at your earliest opportunity. The biggest and best screen printers around the world are recognizing this new products value. We invite you to also benefit from the multitude of uses of the new Roller Squeegee.

Place your orders now by calling us at 800-228-4668.
Or - email us at sales@actionengineering.com

Thank you again everyone at TSB.

P.S. - I will be proudly working with SPSI at their Digital Magic Workshop all of next week. If you're an SPSI customer - I hope to see you there. These new Roller Squeegees will be on display along several other newly developed screen printing solutions.

[sweetts]

thinking we could make that for a quarter of the price. what a simple idea

Sweetts I think your right. For the DIY guys that don't have the $$$. See below HTC Roller stand. Just cut the stand part off and attach your mounting bracket. I'm sure its not as strong as Actions but for a smoothing or lint roller would do fine.

http://www.shopsmith.com/ownersite/catalog/swd_rollerstand.htm

Just a dead man roller and a bracket. They should stick a handle on One for the manual printers with money for toys LOL

Sent  from samsung gem(the worst smart phone ever)

[Frog]

Questions about smoothing screens and their use in general popped up and were given their own thread in General Screen Printing

[abchung]

I was looking through some SRoque youtube clip.... they use one for foil.... it is around 25 sec into the clip.

SROQUE RoqPrint Compact

[Gilligan]

Dude, they have a vacuum on that press!

Sure beats trying to use my Roomba

[inkman996]

Song sounded like it was leading into chariots of fire.

[larryk]

So you bragged that you had these rollers for all automatics........ I called to place an order and was told that you DON"T have them for the V-squegee machines........ and I was also told I would get a call right back from someone with a solution to my problem. That was last week sometime and I'm still waiting. After reading all the high praise that Action is getting I can only think that my request has fallen through the cracks and anytime I will be hearing from you........ and I think I seen where someone else had asked about one for a V-squegee they had but I didn't see the response to that........ anxiously waiting for a reply and thank you for reading this.

[Screened Gear]

I was looking through some SRoque youtube clip.... they use one for foil.... it is around 25 sec into the clip.
SROQUE RoqPrint Compact

This makes me think? Who has the rights to produce and sell the Roller squeegee? Who holds the copyright, Patent?

[Rockers]

Mine will be delivered on Tuesday. Right on time for our 200 pcs job with 3 multicolor print positions on black tees.