Author Topic: Mesh, Temperature, and Tension, a TSB Mythbuster adventure  (Read 4004 times)

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Mesh, Temperature, and Tension, a TSB Mythbuster adventure
« Reply #15 on: August 17, 2012, 06:47:50 PM »
Welp, I was wrong.


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Mesh, Temperature, and Tension, a TSB Mythbuster adventure
« Reply #16 on: August 17, 2012, 07:06:40 PM »
So, old Cliff, on that cold winter's day back in '86, with his flippity floppity old 30"x48" screen on top of the dryer for the morning may have been on to something. Not much, but something.  ;D
That rug really tied the room together, did it not?

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: Mesh, Temperature, and Tension, a TSB Mythbuster adventure
« Reply #17 on: August 17, 2012, 10:20:13 PM »
For lack of a like button great thread very interesting

Sent  from samsung gem(the worst smart phone ever)
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline ScreenPrinter123

  • Hero Member
  • *****
  • Posts: 863
Re: Mesh, Temperature, and Tension, a TSB Mythbuster adventure
« Reply #18 on: August 17, 2012, 11:18:03 PM »
I'm beat, we knocked out 3K impressions today and boy are my arms tired. 

When we have a 3k piece job, we normally use our auto to avoid this... Just sayin'. :)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Mesh, Temperature, and Tension, a TSB Mythbuster adventure
« Reply #19 on: August 20, 2012, 07:33:37 AM »
When Joe Clarke was at M&R he tested that theory by incorporating a flash cure panel with a stretching table and indeed exhibited it at a trade show. Unfortunately it melted the mesh and the project was eventually tabled.