« previous next »
Pages: [1]   Go Down

Author Topic: Epson 1400  (Read 1332 times)

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Epson 1400
« on: July 27, 2012, 11:14:29 AM »
Ok, I got an Epson 1400 printer and ordered the inks to change it into All Black. I downloaded the Accu Rip Trial to get started but now the Red Ink light stays on on the front of the printer and it will not print anything. Anyone got any ideas?
Thanks
Pete
Logged

Offline jason-23

  • Hero Member
  • *****
  • Posts: 958
  • FONTNINJA
Re: Epson 1400
« Reply #1 on: July 27, 2012, 11:31:20 AM »
bad chip in that cartridge maybe???
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Epson 1400
« Reply #2 on: July 27, 2012, 11:53:27 AM »
Quote from: jason-23 on July 27, 2012, 11:31:20 AM
bad chip in that cartridge maybe???

my guess too . . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Epson 1400
« Reply #3 on: July 27, 2012, 01:45:30 PM »
Unplug it, reinstall the carts making sure they are seated and fire it back up. Also this may sound obvious but take the tape off the chip.
Logged

Offline repogolfer

  • !!!
  • Full Member
  • ***
  • Posts: 134
Re: Epson 1400
« Reply #4 on: July 27, 2012, 07:31:20 PM »
On ours we sometimes have issues with the light cyan color....we have to re-seat it a few times afterwards every time....some times also the only way to get it back to normal is to put a real cartridge in there...then put the refillable one back in.

When you hit the ink button the carraige will move over to the middle of the printer...you'll see an arrow on the printer in the middle and the carraige will stop on the color that is causing the light to stay on...sometimes on ours if we do not turn off the power to the printer it will actually stop on every single color...1 at a time.

Jon
Logged

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Re: Epson 1400
« Reply #5 on: July 30, 2012, 08:58:00 AM »
Thanks for all the suggestions, I still can't get it to work. The only other thing I can think of is that the Ink Cartridges I bought are bad.
Logged

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Epson 1400
« Reply #6 on: July 30, 2012, 10:52:02 AM »
Call the folks that you bought the cartridges from, they may have a handy hint. Can you make a test print using the Epson Printer Utility?

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Re: Epson 1400
« Reply #7 on: July 30, 2012, 12:10:05 PM »
Can't print anything
Logged

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Epson 1400
« Reply #8 on: July 30, 2012, 02:30:01 PM »
Always good to have a chip resetting tool around
Logged
Pages: [1]   Go Up
« previous next »