« previous next »
Pages: [1] 2   Go Down

Author Topic: how would you print this?  (Read 3028 times)

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
how would you print this?
« on: February 17, 2012, 12:28:20 PM »


actual file is 300 res

thinking white under , solid yellow , 1/2 tone pink , white high light
Logged

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: how would you print this?
« Reply #1 on: February 17, 2012, 12:37:10 PM »
Halftone the underbase as well, depending on qty i would use two whites.
Logged
"No man is an island"

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: how would you print this?
« Reply #2 on: February 17, 2012, 12:39:38 PM »
Quote from: Inkman996 on February 17, 2012, 12:37:10 PM
Halftone the underbase as well, depending on qty i would use two whites.

probably a measly 25 shirts
Logged

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: how would you print this?
« Reply #3 on: February 17, 2012, 12:45:43 PM »
Shawn

am I understanding you are quoting a job without a ballpark of how many shirt they are going to do...

sam
Logged

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: how would you print this?
« Reply #4 on: February 17, 2012, 12:47:00 PM »
What type of reg marks are you using? I used to use a fat mark and had alot of trouble registering jobs. I went to small centerlines and bullseyes in the corners and line up each screen to a film positive and bam I cut my setup times by more than half. Sometimes a small change can make a big difference.
Logged

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: how would you print this?
« Reply #5 on: February 17, 2012, 12:55:24 PM »
Quote from: Socalfmf on February 17, 2012, 12:45:43 PM
Shawn

am I understanding you are quoting a job without a ballpark of how many shirt they are going to do...

sam

They want 25 to 50 depending on price...
Logged

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: how would you print this?
« Reply #6 on: February 17, 2012, 12:55:59 PM »
Quote from: endless ink printing on February 17, 2012, 12:28:20 PM


actual file is 300 res

thinking white under , solid yellow , 1/2 tone pink , white high light


On my manual I would P/F/P the white using it as the underbase and the showing white. Then depending how accurate your press and you are at printing, print the yellow and pink meeting each other. (the seps have to be dead on and you have to hold the dots.) I wouldn't do this at a really high LPI. I think a little larger dot would look better with this design (it is a seventy’s or eighty’s looking design). Maybe a 40 LPI.  If you want to make sure your ok. I would print a full yellow flash then the pink on top or the other way around if you have a really sticky yellow on that much coverage.
Logged

Offline Command-Z

  • !!!
  • Hero Member
  • *****
  • Posts: 956
Re: how would you print this?
« Reply #7 on: February 17, 2012, 12:56:28 PM »
Your yellow should fade out at the top where the pink gets solid... keeps the color clean and the hand soft.
Logged
Design, Illustration and Color Separation for the Imprinted Apparel Industry for over 20 years. SeibelStudio.com
 Custom art not in the budget? Check out Bad Bonz Designs

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: how would you print this?
« Reply #8 on: February 17, 2012, 12:57:42 PM »
1/2 tone setting and recomedations? Using 255's for everything on this one.
Logged

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: how would you print this?
« Reply #9 on: February 17, 2012, 12:58:18 PM »
The best thing about using the hilite white would be that it would step on the wet pink and blend it nicely, and yep just like scott said you have to fade out the yellow as well.
Logged
"No man is an island"

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: how would you print this?
« Reply #10 on: February 17, 2012, 01:37:58 PM »
If you want those killer seamless fades pigmented discharge would yield a superior print with amazing color and hand.
You asked!
Logged

Offline Mr Tees!!

  • Hero Member
  • *****
  • Posts: 661
Re: how would you print this?
« Reply #11 on: February 17, 2012, 01:38:37 PM »
...just wanted to say that I really dig this design, the retro early 80s' feel speaks to me. simple too. Is that a font?

 8) 
Logged
Thanks TSB gang!!

...Sean, Mr Tees!!!

Offline Ripcord

  • Sr. Member
  • ****
  • Posts: 283
Re: how would you print this?
« Reply #12 on: February 17, 2012, 02:24:10 PM »
For 25-50 of this I'd sub it out to someone with a DTG. This kind of design tends to look better when printed digitally...
Logged
Raster to vector conversion

Offline jason-23

  • Hero Member
  • *****
  • Posts: 958
  • FONTNINJA
Re: how would you print this?
« Reply #13 on: February 17, 2012, 02:29:23 PM »
pfp underbase with halftones due to the light burst things, yellow with half tones, pink with half tones, maybe a high white. underbase 156,the rest with 230's. how are you going to sep it?
« Last Edit: February 17, 2012, 02:32:00 PM by jason-23 »
Logged

Offline jason-23

  • Hero Member
  • *****
  • Posts: 958
  • FONTNINJA
Re: how would you print this?
« Reply #14 on: February 17, 2012, 02:30:54 PM »
Quote from: Ripcord on February 17, 2012, 02:24:10 PM
For 25-50 of this I'd sub it out to someone with a DTG. This kind of design tends to look better when printed digitally...
bump that junk....make you money endless. just charge accordingly and you will be good.
Logged
Pages: [1] 2   Go Up
« previous next »