Author Topic: Exposure unit recommendations.  (Read 3337 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Re: Exposure unit recommendations.
« Reply #15 on: July 25, 2024, 08:52:41 AM »
If you don't have the power, this is all a moot point
Dave

I've got plenty of juice here.  :D
Are there any sellers I should stay away from? I remember a big dust up with one a few years ago.
Tees and Coffee


Offline Evo

  • Hero Member
  • *****
  • Posts: 955
  • Anything is possible.
Re: Exposure unit recommendations.
« Reply #16 on: July 25, 2024, 03:04:03 PM »
Used M&R MSP 3140 exposure units (and most any single point metal halide units) are going for next to nothing these days. If you are still on film these are fantastic units and you can dial in your exposure and lock it in with the built in integrator.
Just to make sure I'm looking at the correct model, these are 110 volt?

I had one that was 120V, 18 amp. If I recall the transformer wiring inside can be swapped around for different inlet voltages.
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Re: Exposure unit recommendations.
« Reply #17 on: July 31, 2024, 10:36:08 AM »
Any thoughts on this company?
They were recommended by a rep at Ulano.
https://lightspeedequipment.com/led-exposure-unit/
Tees and Coffee