Author Topic: Ink for Neoprene?  (Read 8458 times)

Offline whitewater

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1831
Re: Ink for Neoprene?
« Reply #15 on: January 24, 2012, 05:18:57 PM »
if i were you i make sure you charge accordingly
those air dry inks gives me the headaches and allergies

i've been using some air dry inks from nazdar..I'm not there at the shop so cannot remember the 2 series i use. I print on mylar and glass..

I wear  respirator..Last summer I printed next to my open door and It still made my throat sore for a week or more..i seemed fine while printing but it hit me the next day...don't take a chance..Also to cure it faster I set up a couple hairdryers to blow on the material..instead of the 3 minutes to cure, it was 20-30 seconds...If you think you'll do it that way I'll post a few pics to show my setup..I can do 150-175 pcs. of mylar per hour the way I do it.