Author Topic: !#*%# SPOT GUNS!!!!  (Read 2488 times)

Offline Mr Tees!!

  • Hero Member
  • *****
  • Posts: 661
!#*%# SPOT GUNS!!!!
« on: January 13, 2012, 11:55:51 AM »
...ok, I am DONE with these cheapass Expert SP100 guns, I have NEVER dropped one, but they dont last at ALL, and I rarely even use em. This is the fourth one!   >:( >:( >:( >:(

...One of you wonderful folks please recommend a QUALITY gun, im thinking with as much metal-construction as possible.

...thanks!!!!
Thanks TSB gang!!

...Sean, Mr Tees!!!


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: !#*%# SPOT GUNS!!!!
« Reply #1 on: January 13, 2012, 12:01:14 PM »
ZIM, the best gun I have used...HANDS DOWN.

http://www.zim-intl.com/screen/equipment.htm

Model K-51.  They usually offer a special with it.  It includes Acetone, which I take home and use for furniture stripping or oil based paint cleanup.

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: !#*%# SPOT GUNS!!!!
« Reply #2 on: January 13, 2012, 12:35:13 PM »
Mystic ANC, had it for two years now and never let me down yet.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: !#*%# SPOT GUNS!!!!
« Reply #3 on: January 13, 2012, 01:22:46 PM »
What makes the ZIM gun awesome is the lack of a nozzle.  It can't break off when you drop it.  Although what is even funnier is we've never dropped this gun...go figure.

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: !#*%# SPOT GUNS!!!!
« Reply #4 on: January 14, 2012, 01:17:08 PM »
The model they have with the "Air Dryer Kit" sounds interesting--after years and years of walking back and forth from the spot clean station to the blow chuck.  :)

Offline Tagless Threads

  • Verified/Junior
  • **
  • Posts: 61
Re: !#*%# SPOT GUNS!!!!
« Reply #5 on: January 31, 2012, 02:26:42 PM »
We use the 9800B from CCI. Had over two years and no problems.
Screen Printing - Tagless Threads
twitter - facebook - flickr

Offline Printwizard

  • Verified/Junior
  • **
  • Posts: 18
Re: !#*%# SPOT GUNS!!!!
« Reply #6 on: February 02, 2012, 11:36:29 AM »
Red Arrow' we tie them up so they can't drop.  We also run them with Acetone, used to use tricloroethylene but it was way more expensive and left more ring marks, acetone dissolves fully cured prints and works possibly better on dry ink than wet ink.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: !#*%# SPOT GUNS!!!!
« Reply #7 on: February 02, 2012, 01:16:11 PM »
yeah, with acetone though you have the potential to turn your spot gun into a flame thrower.

I used to do it with a lighter..heheh.