Author Topic: Sportsman is dropping squeegees like they are hot  (Read 1627 times)

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Sportsman is dropping squeegees like they are hot
« on: June 29, 2021, 11:30:43 AM »
I've got this happening on 2 heads and randomly.  I don't hear any air leaks.  Anyone else ever had this problem?  If so, what did you discover was causing this?

It's not a job if you love doing it.


Offline Lizard

  • Sr. Member
  • ****
  • Posts: 306
Re: Sportsman is dropping squeegees like they are hot
« Reply #1 on: June 30, 2021, 07:03:09 AM »
I assume the squeegee is walking and when it gets to the notch is falls out. Had it happen before. Maybe the squeegee wasn’t centered properly and close to the notch. Possible the air clamps are worn as well. I would try isolating the problem squeegee (s). Or install the squeegee in the opposite direction and see if the squeegee still walks in the same direction.
Toby
 Shirt Lizard Charlotte, NC 704-521-5225

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Re: Sportsman is dropping squeegees like they are hot
« Reply #2 on: June 30, 2021, 08:09:35 AM »
I assume the squeegee is walking and when it gets to the notch is falls out. Had it happen before. Maybe the squeegee wasn’t centered properly and close to the notch. Possible the air clamps are worn as well. I would try isolating the problem squeegee (s). Or install the squeegee in the opposite direction and see if the squeegee still walks in the same direction.
Thanks for the suggestion.  I've got to get it narrowed down.  The mess it creates can be pretty nasty.
It's not a job if you love doing it.

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Sportsman is dropping squeegees like they are hot
« Reply #3 on: June 30, 2021, 01:40:07 PM »
I’ve seen that happen just like Lizard described.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com