Author Topic: Replacing proximity switch ?  (Read 1172 times)

Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 205
Replacing proximity switch ?
« on: December 10, 2020, 01:48:49 PM »
I have 2013 Dback. Replacing head 1 pro switch. I first did call M&R, no call back yet. Looking to release the wires for the harness. Looking at attached photo, to me it looks like i should push a small screwdriver in the square hole and press the plastic nub while pulling up on the wire. Does this sound right? Any help would be great, just want to make sure.
Thanks, Peter


Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 205
Re: Replacing proximity switch ?
« Reply #1 on: December 10, 2020, 01:53:37 PM »
All set, simple enough.