Author Topic: Announcement-Buying a New Dryer  (Read 17593 times)

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Announcement
« Reply #45 on: January 16, 2012, 06:30:56 PM »
She's alive.  We finally got power and gas ran to the beast and guess what?  We turned it on, turned on the burner and within seconds, it fired right up and ran for the next 5 hours without a single issue and held perfect temp and damn is all I got to say.  What a piece of equipment.  I can't wait to see other manufacturer's dryers to compare this thing, but the few that I have seen couldn't hold this things jock strap, what a freaking tool this is.  I am as impressed with this equipment as I was the auto when we got it installed, and that is saying something right there.





Matt, M&R tech hard at work.









Thank you Rich Hoffman and M&R crew, you've done a hell of a job here with this dryer and I am very proud to have it in our shop.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.


Offline Get Shirts

  • Hero Member
  • *****
  • Posts: 649
Announcement
« Reply #46 on: January 16, 2012, 07:56:29 PM »
Matt is an incredible tech and an awesome guy!  That dryer is beautiful, I'm hoping to install one later this year.

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Announcement
« Reply #47 on: January 16, 2012, 08:26:37 PM »
Your post reminded me on "you-know-who's" posts. A lot of pics of a "blue" equipment.  LOL

Dryer looks great, but I could not see where the press is located next to the dryer. I hope it is not too far away :)

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Announcement
« Reply #48 on: January 16, 2012, 09:25:09 PM »
Your post reminded me on "you-know-who's" posts. A lot of pics of a "blue" equipment.  LOL

Dryer looks great, but I could not see where the press is located next to the dryer. I hope it is not too far away :)

From the end of the pallet to the edge of the belt, it's 26 inches.  Perfect fit, it's about a foot closer than with the old dryer.  My printer was a little hesitant with the new distance but I told him to get back with me in a few weeks and if he still doesn't like it, we can move it.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Announcement
« Reply #49 on: January 16, 2012, 11:13:04 PM »
My bad. I did not even see the press in second-to-last picture.

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Announcement
« Reply #50 on: March 12, 2012, 05:58:11 PM »
I wanted to bring this thread back to the top since getting our latest electricity bill.  This is the first full cycle that the dryer was on because the last bill had about one week of the old Texair still running.

DRUM ROLL PLEASE.....................................................................

Old average monthly bill for the screen printing building using a 1991ish, American Texair gas and 3 radiant panels, 48" belt width, 10' long heat chamber................$1150.00

Electricity bill for February with the M&R Sprint International 60" belt width, 12' heat chamber...$496.00

I'll admit, I was nervous when Charlotte was opening that envelope, and the look on her face at first was not good so I was bracing myself for the worst.  It turned out that she was not reading it correctly the first time she looked at it then her jaw dropped to the desk and she showed me the bill.  I am freaking pumped right now.  I need to go find the latest gas bill and compare that too.  I'll post back, good or bad, when I find that bill.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: Announcement-Buying a New Dryer
« Reply #51 on: March 12, 2012, 06:01:51 PM »
When you do I want to know the ROI on that baby...

sam

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: Announcement-Buying a New Dryer
« Reply #52 on: March 12, 2012, 07:16:08 PM »
Jesus Alam that easily pays for itself
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Evo

  • Hero Member
  • *****
  • Posts: 950
  • Anything is possible.
Re: Announcement-Buying a New Dryer
« Reply #53 on: March 12, 2012, 08:04:22 PM »
A potential $7800 a year. You just paid for the Sidewinder plus a holiday dinner party for the crew.
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline hazeremover

  • Verified/Junior
  • **
  • Posts: 40
Re: Announcement-Buying a New Dryer
« Reply #54 on: March 12, 2012, 08:35:43 PM »
Can't ever go wrong with an M&R Sprint. Hello profits! :)

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Announcement-Buying a New Dryer
« Reply #55 on: March 12, 2012, 09:30:55 PM »
I'm also thinking that it might be using less gas even though it's significantly bigger than the old texair. 
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: Announcement-Buying a New Dryer
« Reply #56 on: March 13, 2012, 12:01:41 PM »
Alan

that is why I would love to figure out the ROI on that machine...

sounds great..I know we went from our 800's electric bill to around 140 bucks a month and our gas is still only 170ish for the month....we are killing it....plus have a better dryer and bigger dryer

Sam

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Announcement-Buying a New Dryer
« Reply #57 on: March 13, 2012, 12:12:06 PM »
I'd be interested in seeing the gas usage just for academic reasons.

A BTU is a BTU and turning energy into heat is pretty simple... obviously it's easy to be wasteful with gas but only when you aren't trying to use it for heat.  I'd HOPE that the difference is minimal... if you make commercial gas burners you better know a thing or two about it and make it fairly efficient.  Then again, when you got thousands of jets in there if you "cut corners" to save cost that can DEFINITELY get exponentially wasteful and quick!

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4277
Re: Announcement-Buying a New Dryer
« Reply #58 on: March 13, 2012, 12:37:17 PM »
I'd think the major difference would be insulation.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Announcement-Buying a New Dryer
« Reply #59 on: March 13, 2012, 12:42:39 PM »
True, I hadn't thought of that... design from that perspective definitely would make a difference.

I was strictly thinking of heat like in a heater like my grandparents had in their old house or a burner on a stove or torch.  But in an "oven", especially an "open" one... things do get muddied up in that regard.