Author Topic: Is anyone using Otto Thread  (Read 1207 times)

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Is anyone using Otto Thread
« on: November 02, 2018, 09:45:45 PM »
Otto caps sells a POLY thread they make and run in there production facilities. The cost is 4.50 a roll for the 5500 yard roll in standard colors and 20 bucks a roll for the metallics. That is a substantial savings vs. maderia. I am getting ready to place a large order one way or the other and just wanted to know if anyone is running it. Thanks in advance for any input...
Specializing in shop assessment's, flow and efficiency


Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3208
Re: Is anyone using Otto Thread
« Reply #1 on: November 03, 2018, 06:14:08 AM »
I can't vouch for Otto, but I have tried the house brand stuff from Alpha. It never sewed right for us, huge headache. Remember different brands use different tensions so it may not be worth the gamble if you're already set up using Madeira. It's like ink, sure you can save a buck on cheaper ink but what is it really costing you in the end?....
...keep doing what you're doing, you'll only get what you've got...

Offline 1964GN

  • Hero Member
  • *****
  • Posts: 833
Re: Is anyone using Otto Thread
« Reply #2 on: November 03, 2018, 07:43:35 AM »
Thread is such a small expense. Do the math. We are talking a savings of pennys per job. Buy the best proven thread you can.

Offline Logowear

  • Verified/Junior
  • **
  • Posts: 51
Re: Is anyone using Otto Thread
« Reply #3 on: November 03, 2018, 11:35:41 AM »
I use Madeira Poly, but have switched my white to Otto. I like the color, sheen and how it runs!
I never did like the Madeira Poly white. It's too dull.
I have also filled in colors that Madeira lacks with Otto, RA and Gunold.

Specialty Stitches

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Is anyone using Otto Thread
« Reply #4 on: November 04, 2018, 10:43:28 PM »
Thanks for the responses. I will post on our choice and how it sews on our new Tajima T-mar machines.
« Last Edit: November 04, 2018, 10:46:41 PM by RICK STEFANICK »
Specializing in shop assessment's, flow and efficiency