« previous next »
Pages: [1]   Go Down

Author Topic: DTG onto wooden substrate  (Read 1711 times)

Offline downtowntshirts

  • Verified/Junior
  • **
  • Posts: 54
DTG onto wooden substrate
« on: June 21, 2018, 06:43:20 PM »
Has anyone ever tried it? If so how do you cure the ink? Conveyor dryer?
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: DTG onto wooden substrate
« Reply #1 on: June 21, 2018, 06:53:49 PM »
there's plenty of this type of stuff on the interwebs.
This particular one does not heat set the ink.
http://www.dtgprintsolutions.com/?p=1287
Logged
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6054
Re: DTG onto wooden substrate
« Reply #2 on: June 22, 2018, 10:01:36 AM »
there are other printers for this, that aren't DTG, after all, where's the "G"?

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: DTG onto wooden substrate
« Reply #3 on: June 22, 2018, 11:38:51 AM »
Curing it wouldn't be a very big issue, as who is going to wash the wood piece...

Logged

Offline JeridHill

  • Verified/Junior
  • **
  • Posts: 83
Re: DTG onto wooden substrate
« Reply #4 on: July 11, 2018, 10:41:47 AM »
We've printed on wood and other items for years. Using an IRC (Inkjet Receptive Coating) will give you the best results. You apply it, let it dry, print, let it dry. For durability you would want to top coat the wood for protection.
Logged
Pages: [1]   Go Up
« previous next »