« previous next »
Pages: [1]   Go Down

Author Topic: Automatic industrial print head cleaners  (Read 2814 times)

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Automatic industrial print head cleaners
« on: January 30, 2018, 12:34:07 PM »
Anyone have any Experience  with these?

For the cost of 1.5 Gen 4 heads, I can get a recovery system...

Just thinking ahead, as we now have 9 gen 4 heads in the shop....

If these are effective it may be worth it...

Anyone have experience?

Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Automatic industrial print head cleaners
« Reply #1 on: January 30, 2018, 03:58:56 PM »
can you give us a link to the product? 'not really sure what you are talking about. . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Jepaul

  • Full Member
  • ***
  • Posts: 127
  • www.youngonecorporation.com
Re: Automatic industrial print head cleaners
« Reply #2 on: January 30, 2018, 04:04:20 PM »
This works very well.  ROQ uses this to recondition print heads from the Hybrid Fuji Starfire heads. 

https://www.printheaddoctor.com/
Logged

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Automatic industrial print head cleaners
« Reply #3 on: January 30, 2018, 05:13:43 PM »
Yep the one above is what I'm talking about...

Looks like it would be worth it.

Obviously not if you have a head strike, but if its just cogged nozzles, you may be able to revive a pricey head

Logged

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Automatic industrial print head cleaners
« Reply #4 on: January 30, 2018, 05:38:05 PM »
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!

Cheers!

Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Automatic industrial print head cleaners
« Reply #5 on: January 30, 2018, 05:44:27 PM »
Quote from: ffokazak on January 30, 2018, 05:38:05 PM
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!

Cheers!

That sounds like a pretty good idea! Which heads does it support?

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Automatic industrial print head cleaners
« Reply #6 on: January 30, 2018, 06:25:23 PM »
A list so vast, it makes me realize I know very little about industrial print heads!

Logged

Offline Alex M

  • !!!
  • Sr. Member
  • ****
  • Posts: 257
Re: Automatic industrial print head cleaners
« Reply #7 on: January 30, 2018, 10:31:12 PM »
Be VERY careful!!!
The solvents they send with those units are strong! A couple of them delaminated some of the gen 4 heads we cleaned. Just make sure you pay close attention to their instructions.


Sent from my iPhone using Tapatalk
Logged
Alex Mammoser
Director of Sales
Easiway Systems
Mobile: +1 630 220 6588
alex@easiway.com
Pages: [1]   Go Up
« previous next »