Author Topic: Spot Cleaning Gun  (Read 8214 times)

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Spot Cleaning Gun
« on: November 22, 2011, 10:28:43 PM »
ok lets start a new topic here.  i posted earlier about if it was wise to invest in a spot cleaning gun instead of just using the c60 stuff that comes in an aerisol can.

i did find one that i am thinking about below any help / suggestions would be greatly appreciated.

Albatross/Expert SP3000 Cleaning Gun
3000 PSI Adjustable flow rate and nozzle.
SP3000 $149.00
Jayz Teez Screen Printing
Houtzdale, PA.


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Spot Cleaning Gun
« Reply #1 on: November 22, 2011, 10:33:58 PM »
I've been through a lot and the best one is from ZIM Chemical.  It is the k-51 and they usually have a good sale running on it.  I think I got mine for $129 with 12 quarts of acetone.  Which I don't use it in, but I use acetone for other things like refinishing furniture , etc.  So I still buy it.

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Re: Spot Cleaning Gun
« Reply #2 on: November 22, 2011, 10:36:44 PM »
the one i posted is on sale at Victory Factory

Albatross SP-3000 Gun plus 1 Gallon of SPIF2 Spot cleaner - Special $99.00
Jayz Teez Screen Printing
Houtzdale, PA.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Spot Cleaning Gun
« Reply #3 on: November 22, 2011, 11:05:50 PM »
Some like the metal gun that goes by a few house brand names, we do very little spot cleaning and I've had 2 of the 'babs' guns crap out on me in short time due to bad threads on one of the components.  With some encouragement, they took the first back and sent me another with the exact same issue.  Not worth the time messing with them or the perceived savings in my opinion. 

I picked up a CCI gun that's on it's way and I'm hoping this one lasts for us. 

We use SPIF II by albatross.  It's weird stuff, chemically speaking it appears to be non-flammable lighter fluid or something but it works and it seems to be the safest thing out there.

I wish we had a vent unit though, lots of advantages to having those if you do a lot of cleaning and a necessity if you're using the gnarly stuff in the gun (I believe I read an msds on some of that stuff, likely (hopefully?) phased out by now, but one of the side effects of using it without proper ventilation was literally death, right there on the sheet, yikes...) but I can't justify buying one when we use the oops gun so infrequently.   It would be a massive help in avoiding halos and keeping the fluid right where you want it, not to mention the fluid we use smells like ass. 

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: Spot Cleaning Gun
« Reply #4 on: November 23, 2011, 12:05:39 AM »
I had a CCI gun I used it for two shirts and the nozzle clogged, it was brand new. I tried to return it with no luck they said I must have not stored it properly, I just opened it! I tried to find a new nozzle and no one could locate one for me. Now it just sits and looks pretty totally useless to me. If you know where to get parts let me know, Oh it had no paper work with it either so no parts lists big thumbs down on CCI spot gun
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Spot Cleaning Gun
« Reply #5 on: November 23, 2011, 01:12:20 AM »
I like ZIM spot guns. they seem to last and really get it done.
Specializing in shop assessment's, flow and efficiency

Offline shirtz

  • Full Member
  • ***
  • Posts: 118
Re: Spot Cleaning Gun
« Reply #6 on: November 23, 2011, 06:17:04 AM »
Just bought one yesterday from Miami screen supply for $60.00  Expert not sure of the model. The way my guys drop these things I cheap out on them.

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Re: Spot Cleaning Gun
« Reply #7 on: November 23, 2011, 06:42:21 AM »
Is this a good deal?  anyone have this brand?
the one i posted is on sale at Victory Factory

Albatross SP-3000 Gun plus 1 Gallon of SPIF2 Spot cleaner - Special $99.00
Jayz Teez Screen Printing
Houtzdale, PA.

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Spot Cleaning Gun
« Reply #8 on: November 23, 2011, 07:25:00 AM »
ok lets start a new topic here.  i posted earlier about if it was wise to invest in a spot cleaning gun instead of just using the c60 stuff that comes in an aerisol can.

i did find one that i am thinking about below any help / suggestions would be greatly appreciated.

Albatross/Expert SP3000 Cleaning Gun
3000 PSI Adjustable flow rate and nozzle.
SP3000 $149.00
Ours is $80
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 573
Re: Spot Cleaning Gun
« Reply #9 on: November 23, 2011, 07:48:43 AM »


I wish we had a vent unit though, lots of advantages to having those if you do a lot of cleaning and a necessity if you're using the gnarly stuff in the gun (I believe I read an msds on some of that stuff, likely (hopefully?) phased out by now, but one of the side effects of using it without proper ventilation was literally death, right there on the sheet, yikes...) but I can't justify buying one when we use the oops gun so infrequently.   It would be a massive help in avoiding halos and keeping the fluid right where you want it, not to mention the fluid we use smells like ass.


the chemical that you are referring to is Methylene Chloride (aka Dichloromethane),  a very toxic chemical. 

below is a copy/paste from http://www.osha.gov/SLTC/methylenechloride/:

Hazard Recognition

Methylene chloride is a solvent which is used in many different types of work activities, such as paint stripping, polyurethane foam manufacturing, cleaning, and degreasing. Employees exposed to methylene chloride are at increased risk of developing cancer, adverse effects on the heart, central nervous system and liver, and skin or eye irritation. Exposure may occur through inhalation, by absorption through the skin, or through contact with the skin.

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Spot Cleaning Gun
« Reply #10 on: November 23, 2011, 10:12:00 AM »
I had a CCI gun I used it for two shirts and the nozzle clogged, it was brand new. I tried to return it with no luck they said I must have not stored it properly, I just opened it! I tried to find a new nozzle and no one could locate one for me. Now it just sits and looks pretty totally useless to me. If you know where to get parts let me know, Oh it had no paper work with it either so no parts lists big thumbs down on CCI spot gun

Not sure If it'll help by I bought  nozzle for mine from Victory Factory screen supply , the damn thing cost 1/2 the price of a whole new gun.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Spot Cleaning Gun
« Reply #11 on: November 23, 2011, 10:13:43 AM »
that is what I like about the ZIM gun, the nozzle has no neck to it to get broken.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Spot Cleaning Gun
« Reply #12 on: November 23, 2011, 12:24:08 PM »
Though no gun is very happy being dropped,  it's the extension that is especially weak on the Babs or whatever the metal handle gun is called, and yes, with nozzle, it's $29. Nozzle alone is $20
That rug really tied the room together, did it not?

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Re: Spot Cleaning Gun
« Reply #13 on: November 23, 2011, 12:31:21 PM »
i ended up buying the albatros one with the liquid for 99.00 from victory factory. 
Jayz Teez Screen Printing
Houtzdale, PA.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Spot Cleaning Gun
« Reply #14 on: November 23, 2011, 12:54:14 PM »
I got tie up up with a phone call while I was trying to post, but YES get a spot gun they do come in handy...a buddy of mine showed me how to made a homemade exhuast works like a charm.  He gave me a pc of 3 to 4 inch round galvanize pipe and I hooked up to a small wet/dry vac with a pc of old screen mesh tie around the top...I'll try to post a pic, it ain't pretty but works the same.

DArryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!