Author Topic: CorelDRAW - Trapping, Overprints, etc  (Read 3614 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
CorelDRAW - Trapping, Overprints, etc
« on: November 15, 2011, 10:34:17 AM »
I mentioned this in another thread when you said that you like to do some things manually when making separations.

I also find myself doing a lot of things manually, but often it's because I don't fully understand the Auto options.
Somewhere between v8 and current (I use X4), options for Trapping and Auto Trapping in the Print window changed. I also seem to get confused with Overprints.

Can you give me and the other Corel-ers an overview of these features?

Thanks
That rug really tied the room together, did it not?


Offline Fluid

  • !!!
  • Sr. Member
  • ****
  • Posts: 462
  • Keep the Ink Moving... Stay Corelian My Friends!
Re: CorelDRAW - Trapping, Overprints, etc
« Reply #1 on: November 15, 2011, 10:51:23 AM »
let me pull some info together and will make a post in a little bit.  No matter what, just remember the advanced features were designed for offset and not us T Shirt artists / printers.

During my beta cycles and advisory council sessions with Corel, I have put forth a ton of effort into getting features added that would better us in our industry. Hopefully we will see some in the future. One can only hope
Richard
--Fluid       www.fluiddsn.com Graphic Designs, Color Separations & Film Output 15+ years Industry Experience - CorelDRAW Master® 

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: CorelDRAW - Trapping, Overprints, etc
« Reply #2 on: November 15, 2011, 10:57:14 AM »
I, as I suspect others, am waiting with beta-ed breath.  :P
That rug really tied the room together, did it not?

Offline prozyan

  • Hero Member
  • *****
  • Posts: 510
Re: CorelDRAW - Trapping, Overprints, etc
« Reply #3 on: November 15, 2011, 12:35:53 PM »
The overprints option is easy.

Lets say you have a letter T that you color yellow.  Now you copy and paste the T on top of itself and color it blue.  Only the blue color shows.  Now if you right click on the blue T and select "overprint fill", its going to simulate printing the blue on top of the yellow and give you a greenish color.

Now when you go into the print options, there is an option to either preserve or ignore document overprints.  If you preserve it, it will print out plates for both the yellow and blue T.  If you choose to ignore overprints, it will only print out a plate for the blue T.
If Barbie is so popular, why do you have to buy her friends?


Offline Fluid

  • !!!
  • Sr. Member
  • ****
  • Posts: 462
  • Keep the Ink Moving... Stay Corelian My Friends!
Re: CorelDRAW - Trapping, Overprints, etc
« Reply #5 on: November 15, 2011, 04:58:25 PM »
LOL screenxpress



I am apparently writing a book so stay tuned.....................
Richard
--Fluid       www.fluiddsn.com Graphic Designs, Color Separations & Film Output 15+ years Industry Experience - CorelDRAW Master® 

Offline Fluid

  • !!!
  • Sr. Member
  • ****
  • Posts: 462
  • Keep the Ink Moving... Stay Corelian My Friends!
Re: CorelDRAW - Trapping, Overprints, etc
« Reply #6 on: November 17, 2011, 08:21:14 PM »
My book is almost complete. Will be posting hopefully Sunday    8)
Richard
--Fluid       www.fluiddsn.com Graphic Designs, Color Separations & Film Output 15+ years Industry Experience - CorelDRAW Master® 

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2434
Re: CorelDRAW - Trapping, Overprints, etc
« Reply #7 on: November 17, 2011, 11:01:24 PM »
Well please hurry up, I'm running out of Red Wigglers and the Night Crawlers scare me.   :D
« Last Edit: November 17, 2011, 11:03:35 PM by screenxpress »
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline Fluid

  • !!!
  • Sr. Member
  • ****
  • Posts: 462
  • Keep the Ink Moving... Stay Corelian My Friends!
Re: CorelDRAW - Trapping, Overprints, etc
« Reply #8 on: November 21, 2011, 06:03:13 PM »
LOL Sorry for the delay. I had a person emergency that I had to take care of and left town around 3 AM Friday morning. Didn't get back until 12:30 Saturday night.  900+ miles in that time and had to do art.  Will get it posted here soon, I promise   8)
Richard
--Fluid       www.fluiddsn.com Graphic Designs, Color Separations & Film Output 15+ years Industry Experience - CorelDRAW Master®