Author Topic: Rush screens.....How long does it take  (Read 4465 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Rush screens.....How long does it take
« on: April 26, 2017, 04:40:55 PM »
It happens on press every now and then for most of us so................when your on press and need a new screen now. How long does it take to image/expose rinse/ dry/final prep/deliver new screen to press?


Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Rush screens.....How long does it take
« Reply #1 on: April 26, 2017, 04:44:37 PM »
Typically less than 10 minutes, up to 15 depending on image size and mesh count.  iImage and starlight here.  The biggest variable will simply be getting the screen dry after rinsing.  Hair dryer.... I Need one with extra volume control ;)
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Rush screens.....How long does it take
« Reply #2 on: April 26, 2017, 04:51:59 PM »
Thats a good number Colin.

Offline Atownsend

  • !!!
  • Sr. Member
  • ****
  • Posts: 421
Re: Rush screens.....How long does it take
« Reply #3 on: April 26, 2017, 04:56:27 PM »
15 mins if the film is ready. Amergraph unit + developing tank + drop line for compressed air blowout.  Add another 5-10 to that if we need to do a curves adjustment and re output the film. Epson 7600 is kinda slow, but we get really nice films! 

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Rush screens.....How long does it take
« Reply #4 on: April 26, 2017, 05:05:26 PM »
Thats a good number Colin.

Thanks, only possible with the equipment though.  Tri Lock it into place/small micros/go!

Oh, this is assuming that we just need a replacement, not art adjustments.

That is different..... if art needs adjusting, it depends on how bad I messed up the seps! ;)
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Admiral

  • Hero Member
  • *****
  • Posts: 891
Re: Rush screens.....How long does it take
« Reply #5 on: April 26, 2017, 05:10:31 PM »
10-15min, screen guy already has what he needs since we aren't talking about redoing a separation here.  Drying the screen after stencil washout is what the biggest pain is, we do use an air hose though then put the screen under a fan.

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Rush screens.....How long does it take
« Reply #6 on: April 26, 2017, 05:24:44 PM »
I CONCUR.


Although, with using them that fast after wash, I can't see how "truly dry" or durable they are.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: Rush screens.....How long does it take
« Reply #7 on: April 26, 2017, 06:29:34 PM »
Under 5 min.......
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Rush screens.....How long does it take
« Reply #8 on: April 26, 2017, 06:39:28 PM »
Under 10min.....in Colorado things dry quickly.
(Unless the screen needs some kind of special prep)

Sent from my XT1585 using Tapatalk


Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Rush screens.....How long does it take
« Reply #9 on: April 26, 2017, 06:48:55 PM »
under 5 mins?! Damn in Humid places theres no way haha

That being said if I use a squeegee to remove excess water and get the drying started with compressor air that has been dried were under ten minutes...


Offline shaneds

  • Verified/Junior
  • **
  • Posts: 47
Re: Rush screens.....How long does it take
« Reply #10 on: April 26, 2017, 08:08:19 PM »
10 min here

Offline Doug B

  • !!!
  • Hero Member
  • *****
  • Posts: 547
Re: Rush screens.....How long does it take
« Reply #11 on: April 27, 2017, 06:03:27 AM »
  15 here also. 20 second exposure and I have a drying cabinet that does the trick. Otherwise, it could be a lot longer in Florida this close to the coast.

Offline Croft

  • Hero Member
  • *****
  • Posts: 875
Re: Rush screens.....How long does it take
« Reply #12 on: April 27, 2017, 08:31:04 AM »
Under 5 min.......

Come on along with walking on water you can make it disappear as fast :)

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: Rush screens.....How long does it take
« Reply #13 on: April 27, 2017, 09:07:32 AM »
With the CTS its nice, less than 10 minutes. If its something that requires a fix on artwork longer.
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Rush screens.....How long does it take
« Reply #14 on: April 27, 2017, 09:47:01 AM »
Under 5 and I think Danny is still in drag racing mode, that's fast ;), guess we are very slow here about 30  minute's here, unless I have screens ready I'll say 15
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!