Sell me on the best Emulsion for Plastisol

[TH Apparel]

We use saati textil PV.  I think it's in the $50 range for a gallon.

[Homer]

I would suggest to start with your supplier, see what they offer and start selecting from there. There were some emulsions we really liked but getting them in house was a pain. Or Ordering from 3 different suppliers and it just becomes too much.


After all, this stuff is all the same anyway 

[ebscreen]

I like nearly everything Murakami makes but especially SP-1400.

[whitewater]

Sati Textil PV also...

TH Apparel...where for 50 bucks?

[Prince Art]

We also use Textil PV. Used to use Ulano QTX. Cheaper, easier to get from our suppliers, and no discernible difference when we switched. Can't speak to whether it's "best," but it has worked well for us thus far. If we had a single point light source, I'd give some other emulsions a shot. But we started with a fluorescent unit, and now use a DIY LED unit, and it's fine for both.

[TH Apparel]

Sati Textil PV also...

TH Apparel...where for 50 bucks?

Directly from Saati.  I was wrong though...it's a little over 60 bucks. 

[Homer]

fella by the name of Kevin from some place in Florida used to sell textile PV for 50/gal, he used to advertise on the old forums I think. We used to use a ton of. really nice emulsion.

yeah, this guy:

http://miamiscreenprintsupply.com/product/emulsion-pv-1-gallon/

[3Deep]

Miami ScreenSupply has some pretty good prices bought a roll of squeegee rubber from them, I 'm with you Jay trying to pull my suppliers in to just two maybe three, buying from this one and that one eats you up in shipping trying to save a buck.