23 x31 newman frames wanted

[Shawn (EIP)]

Looking for 6 or more 23x31 auto frames. Email me endlessink@gmail.com

[Homer]

I am too, I decided to buy new ones since I use a dip tank, no leaks. . . 75/ea, buy 6 a month or so, I'll have a nice collection come spring. . .FYI, the screen stretching device form PANELframes works swimmingly with newmans if you happen to need a brand new cheap table. . . just sayin. . .

[Shawn (EIP)]

I am too, I decided to buy new ones since I use a dip tank, no leaks. . . 75/ea, buy 6 a month or so, I'll have a nice collection come spring. . .FYI, the screen stretching device form PANELframes works swimmingly with newmans if you happen to need a brand new cheap table. . . just sayin. . .

Great info! I'll have to check that out. Would that work with bolt mesh though?

[Homer]

only works with bolt mesh. I have one here, I can take some pics of one being stretched and e-mail it over if needed. I got mine for 150.00. . .used of course. . .brand new they are around 450.00

We can go in on some bolt mesh from Garston if you want, let's buy a sh!t load and get a smokin deal. . .Garston and I are becoming good buddies. . .I just ordered a whole bunch of mesh and rollers, these are the only way to go -I don't care anymore - say what you want, newmans are it. . .screw everything else, I'm done playing games. Sam was right. . .

[Shawn (EIP)]

only works with bolt mesh. I have one here, I can take some pics of one being stretched and e-mail it over if needed. I got mine for 150.00. . .used of course. . .brand new they are around 450.00

We can go in on some bolt mesh from Garston if you want, let's buy a sh!t load and get a smokin deal. . .Garston and I are becoming good buddies. . .I just ordered a whole bunch of mesh and rollers, these are the only way to go -I don't care anymore - say what you want, newmans are it. . .screw everything else, I'm done playing games. Sam was right. . .

Went from wood as a hobbiest straight to newmans (least I did something right lol). Please take some pics I want to see this! Ive been flattening my frames on the flatest table in my shop. Always meant to build something.

[Homer]

you can always load up your car and  come over to my shop, stretch them all here. it won't do manual size though -so get buying the auto frames. . .I just spoke to garston, they are going to stock them. . . .

[Evo]

I may have 6 more available out of the remaining frames I have in the shop. I'll take a count later today.

[Socalfmf]

what Sam was right?  NO crap I was right...because I run a business not a hobby....I know you should have listened years ago but someone wouldn't it...hahahahahahha  and no get shur-loc panels...they are much better!!!! just sayin...


glad you are doing it Jay....now if I can just get you to go to ISS AC we will be all set

Sam

[Homer]

what did I say?. . .shut it buddy ok, I don't need to fill your head any bigger. . .hahaha I knew you would see that. . .dammit all to hell.

my shiznit done yet or what. . .I have more on the way.


 officially hijacked.

[Shanarchy]

Sam was right. . .

Attn moderators:

Can we have this phrase put on the banned list. No one needs to read that kind of nonsense.

[Shawn (EIP)]

[bimmridder]

But Sam is ALWAYS right. You'd lose so many posts if you banned that term.

[Printficient]

only works with bolt mesh. I have one here, I can take some pics of one being stretched and e-mail it over if needed. I got mine for 150.00. . .used of course. . .brand new they are around 450.00

We can go in on some bolt mesh from Garston if you want, let's buy a sh!t load and get a smokin deal. . .Garston and I are becoming good buddies. . .I just ordered a whole bunch of mesh and rollers, these are the only way to go -I don't care anymore - say what you want, newmans are it. . .screw everything else, I'm done playing games. Sam was right. . .

Better than this??