Author Topic: Whats the best way to print this? (~50 pieces)  (Read 2342 times)

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Whats the best way to print this? (~50 pieces)
« on: November 18, 2016, 08:33:45 AM »
The customer wanted something glittery... and like the doofuses I've trained them to be, the office help said, "sure. We print glittery ink."

"Glittery" would be a plus...but these just have to go out the door before Thanksgiving. So screw the glitter.  ::)

My goal is to get "close enough" with 5 or 6 screens. The tees are black cotton G5000's and would discharge, but I'd rather do plastisol.

I ran a couple of Simulated Process Seps (UltraSeps) and got a reasonable facsimile but maybe there is a better way. (I've got an 8 color Gauntlet and a 6 color manual.)

Thanks in advance for any possible help!!
Stan


Offline BP

  • Sr. Member
  • ****
  • Posts: 380
Re: Whats the best way to print this? (~50 pieces)
« Reply #1 on: November 18, 2016, 08:54:48 AM »
I would print it in sim process and then print crystalina over the design.
SHIRT HAPPENS!

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Whats the best way to print this? (~50 pieces)
« Reply #2 on: November 18, 2016, 09:00:24 AM »
I would print it in sim process and then print crystalina over the design.

same here
Specializing in shop assessment's, flow and efficiency

Online Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3203
Re: Whats the best way to print this? (~50 pieces)
« Reply #3 on: November 18, 2016, 09:24:58 AM »
exact same here. I just did this yesterday. works great.
...keep doing what you're doing, you'll only get what you've got...

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Whats the best way to print this? (~50 pieces)
« Reply #4 on: November 18, 2016, 01:42:47 PM »
I'm not sure how to do that,  but I'll look into it.

Thanks!

Online Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3203
Re: Whats the best way to print this? (~50 pieces)
« Reply #5 on: November 18, 2016, 02:16:05 PM »
print all your colors flash at the end if you want need to, then over print the entire design with the crystalina 80 mesh or so.
...keep doing what you're doing, you'll only get what you've got...

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Whats the best way to print this? (~50 pieces)
« Reply #6 on: November 18, 2016, 03:18:23 PM »
I have a gallon of premixed Crystalina on the way. Should be here Monday.

My supplier suggested 40 mesh. (Which I do have, actually.) Is 40 mesh overkill?

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Whats the best way to print this? (~50 pieces)
« Reply #7 on: November 18, 2016, 03:18:37 PM »
Stan, is your google broken again? ;)

Lon has a nice vid showing this... Looks cool... Might need to try it out!

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Whats the best way to print this? (~50 pieces)
« Reply #8 on: November 18, 2016, 03:41:26 PM »
No, but it's very very VERY SLOOOOOOOOOW and drips constantly.  ::)  Maybe there is a pill, or um.... nevermind.

I'll check Youtube (Graphite Elements or something like that) and see what I can see!


Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Whats the best way to print this? (~50 pieces)
« Reply #9 on: November 18, 2016, 03:51:03 PM »
40 is what's up. They say 80 but we've had way better results with 40.

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Whats the best way to print this? (~50 pieces)
« Reply #10 on: November 18, 2016, 04:41:44 PM »
Thanks for all the responses.

Stan