Whats the best way to print this? (~50 pieces)

[Itsa Little CrOoked]

The customer wanted something glittery... and like the doofuses I've trained them to be, the office help said, "sure. We print glittery ink."

"Glittery" would be a plus...but these just have to go out the door before Thanksgiving. So screw the glitter. 

My goal is to get "close enough" with 5 or 6 screens. The tees are black cotton G5000's and would discharge, but I'd rather do plastisol.

I ran a couple of Simulated Process Seps (UltraSeps) and got a reasonable facsimile but maybe there is a better way. (I've got an 8 color Gauntlet and a 6 color manual.)

Thanks in advance for any possible help!!
Stan

[BP]

I would print it in sim process and then print crystalina over the design.

[RICK STEFANICK]

I would print it in sim process and then print crystalina over the design.

same here

[Homer]

exact same here. I just did this yesterday. works great.

[Itsa Little CrOoked]

I'm not sure how to do that,  but I'll look into it.

Thanks!

[Homer]

print all your colors flash at the end if you want need to, then over print the entire design with the crystalina 80 mesh or so.

[Itsa Little CrOoked]

I have a gallon of premixed Crystalina on the way. Should be here Monday.

My supplier suggested 40 mesh. (Which I do have, actually.) Is 40 mesh overkill?

[Gilligan]

Stan, is your google broken again?

Lon has a nice vid showing this... Looks cool... Might need to try it out!

[Itsa Little CrOoked]

No, but it's very very VERY SLOOOOOOOOOW and drips constantly.    Maybe there is a pill, or um.... nevermind.

I'll check Youtube (Graphite Elements or something like that) and see what I can see!

[ebscreen]

40 is what's up. They say 80 but we've had way better results with 40.

[Itsa Little CrOoked]

Thanks for all the responses.

Stan