« previous next »
Pages: [1]   Go Down

Author Topic: Not exposed enough?  (Read 2113 times)

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Not exposed enough?
« on: August 30, 2016, 08:00:53 PM »
Just a curiosity here.  When reclaiming I always start spraying the emulsion off from the shirt side of the screen.  While spraying it off I notice the squeegee side is almost a separate film staying in tact until I hit it with the pressure washer from the squeegee side.  Would this be a sign of underexposure?  I never get staining with a white paper towel during development on the squeegee side and never have issues with break down.
Logged
It's not a job if you love doing it.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Not exposed enough?
« Reply #1 on: August 30, 2016, 08:18:01 PM »
Has the emulsion on the squeegee side obviously started to dissolve from the chemistry and then a little scrubbing with a pad or brush?
Logged
That rug really tied the room together, did it not?

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Not exposed enough?
« Reply #2 on: August 30, 2016, 09:00:07 PM »
Could also be your cleaning chemical does not like your emulsion.
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Not exposed enough?
« Reply #3 on: August 30, 2016, 09:40:49 PM »
Quote from: Colin on August 30, 2016, 09:00:07 PM
Could also be your cleaning chemical does not like your emulsion.

but that interaction is a primary characteristic of underexposed screens as well.
Logged
That rug really tied the room together, did it not?

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Not exposed enough?
« Reply #4 on: August 30, 2016, 10:45:04 PM »
You usually see it there yea.

You can also see it with pure photopolymer emulsions and some stronger cleaning chemicals.
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Re: Not exposed enough?
« Reply #5 on: August 31, 2016, 08:39:33 AM »
Quote from: Colin on August 30, 2016, 10:45:04 PM
You usually see it there yea.

You can also see it with pure photopolymer emulsions and some stronger cleaning chemicals.
Quote from: Frog on August 30, 2016, 08:18:01 PM
Has the emulsion on the squeegee side obviously started to dissolve from the chemistry and then a little scrubbing with a pad or brush?

This is the cryocoat emulsion.  I'm using a diptank with evirosolve.  I never thought about chemical interaction.  Thanks everyone for the input.   
« Last Edit: August 31, 2016, 08:46:11 AM by Doug S »
Logged
It's not a job if you love doing it.
Pages: [1]   Go Up
« previous next »