Author Topic: Full manual shop for sale - M&R and more - northern California  (Read 11786 times)

Offline Evo

  • Hero Member
  • *****
  • Posts: 953
  • Anything is possible.
Full manual shop for sale - M&R and more - northern California
« on: October 26, 2011, 04:04:37 AM »
After many years of printing some great shirts for some great people, I am moving on to other creative ventures. Full manual screen printing shop for sale.

M&R Chameleon II 8/4 manual press
8 color, 4 station. Expandable to 14 color, 8 station
Heads have side clamps with air locks.
Press is in excellent condition, clean and ready to work. Excellent support/sampling press for an automated shop.
Includes 4x each adult, youth and sleeve pallets and 1 jacket hold down. Pallets are in fair to good condition. (some could use new rubber)
Also includes 2gal Husky mini compressor
$7,500.00







M&R Nuarc MSP 3140 exposure unit
Excellent condition with a like-new blanket. 120v 18A
$3,000.00






M&R Tri-Loc
For 23"x31" frames. Excellent condition. Full system: includes master frame, pallet, stop block, pin bars and approx 40+ carrier sheets.
$1,100.00


Nuarc VLT23F Light table
23"x28" classic steel light table. Very good condition. Includes grid for Tri-Loc.
$150.00



^^ PACKAGE DEAL FOR PICKUP OF THE ABOVE 4 ITEMS: $11,000.00 ^^



Ranar Turbo Jetstar dryer
24" x 8' conveyor dryer with forced air.
220v 28A (single phase)
Works great and cures water based inks. (with a slow belt speed...manual printing only)
Belt could use replacement.
$900.00 OBO




Workhorse Primus flash dryer
18"x20" flash dryer with rolling stand.
115v 20A (twist-lock plug installed)
Very good condition.
Note: automatic swivel attachment will be included but I am not sure if it works.
$500.00




Newman M3 23"x31" roller frames
Approx 30 total: $20 to $30 each depending on condition, mesh, etc. Email me for a list.





Large rolling screen rack - 24 frames

Dual "z" rails - accommodates 23" or 25" wide frames up to 40" long
$200.00


Rolling screen rack - 14 frames
Accommodates 23"x31" frames
$100.00


Cap press
Older single color cap press. Funky but works well. Includes a couple used screens.
$40.00


Stainless steel washout booth
Shop-built stainless washout booth with riveted translucent HDPE back
Brand new Wall-mounted back-light fleuro fixture included.
Can accommodate 2 auto sized frames at once.
$475.00


Dip tanks (2)
Easiway PT-520 diptanks, $100 each.
Very good condition. 37 gallon size accepts up to 5 auto sized frames.
New drain spigots
$100 each

Epson Stylus Pro 3000
Good condition. Includes original Epson box. (was backup film printer)
$150 obo

Squeegees
Misc wood handle squeegees from 6" to 20", most 70 durometer
$5 each

Spot cleaning gun
Good condition (rarely used)
$25.00


^^ PACKAGE DEAL FOR PICKUP OF ALL ITEMS LISTED: $13,000.00 ^^


Pickup from our location in Santa Rosa, CA preferred. (1 hour north of San Francisco)
Can crate and ship with buyer's expense and arrangement.


jason@evoscreenprinting.com
« Last Edit: October 26, 2011, 04:18:06 AM by Evo »
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)


Offline tpitman

  • Gonzo Member
  • ******
  • Posts: 1059
Re: Full manual shop for sale - M&R and more - northern California
« Reply #1 on: October 26, 2011, 06:24:44 AM »
Man, that stuff looks like brand new. Someone is gonna make out on equipment that was well cared-for.
Work is the curse of the drinking class . . .

Offline Nation03

  • Gonzo Member
  • ******
  • Posts: 1259
  • The Dude abides.
Re: Full manual shop for sale - M&R and more - northern California
« Reply #2 on: October 26, 2011, 07:22:08 AM »
13K is a STEAL! Wish I lived in California.

Offline Gabe

  • Sr. Member
  • ****
  • Posts: 483
  • If it`s not alive, I can print it.
Re: Full manual shop for sale - M&R and more - northern California
« Reply #3 on: October 26, 2011, 12:14:27 PM »
very nice tools i wish i had the space to accomodate all of it
i`m sure it`ll sell quick good luck ;)

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Full manual shop for sale - M&R and more - northern California
« Reply #4 on: October 26, 2011, 02:24:58 PM »
Dibs on the light table, Spot cleaner and some squeegees.
« Last Edit: October 26, 2011, 02:28:16 PM by jsheridan »
Blacktop Graphics Screenprinting and Consulting Services

Offline DILLON

  • Verified/Junior
  • **
  • Posts: 48
Re: Full manual shop for sale - M&R and more - northern California
« Reply #5 on: October 26, 2011, 08:57:43 PM »
I'm curious why you wouldn't try to sell the whole business? You should be able to make more if you include your website and customers and employees? Why wouldn't an entrepreneur want to purchase an established business for ~$40k?

Offline prozyan

  • Hero Member
  • *****
  • Posts: 510
Re: Full manual shop for sale - M&R and more - northern California
« Reply #6 on: October 26, 2011, 11:38:23 PM »
Why wouldn't an entrepreneur want to purchase an established business for ~$40k?

Off topic answer, but no one in their right mind would by for a business like ours greater than the value of the equipment.  Buy the clientele?  They have no real value to you as there is no certainty they continue to purchase from you.  How many times have you seen a successful restaurant go under after a change in ownership?  Happens quite often.

In short, if someone is selling a turn key shop and has their clientele listed as a value, run from the deal.
If Barbie is so popular, why do you have to buy her friends?

Offline Nation03

  • Gonzo Member
  • ******
  • Posts: 1259
  • The Dude abides.
Re: Full manual shop for sale - M&R and more - northern California
« Reply #7 on: October 27, 2011, 07:54:33 AM »
Agreed. My boss is retiring soon and told me he'll just sell me his equipment, doesn't want anything for the business because he can't guarantee that his clients will stay with me.   

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7857
Re: Full manual shop for sale - M&R and more - northern California
« Reply #8 on: October 27, 2011, 08:20:26 AM »
It happens all the time.  I am sure tony knows more about some of the larger shops around here buying smaller ones.  It can be done, and most businesses aren't purchasable frankly because most everything is in the boss's head.  When a key person leaves, it's a scramble.  But there are businesses that are worth more than just the equipment FYI.

Of course this is coming from a guy that paid $250K for a screen printing business and our CPA said it was worth double that.

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Full manual shop for sale - M&R and more - northern California
« Reply #9 on: October 27, 2011, 11:38:09 AM »
Evo you've been PMed.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Full manual shop for sale - M&R and more - northern California
« Reply #10 on: October 27, 2011, 11:44:32 AM »
Evo you've been PMed.

He also specifically listed his email, which may be better if he is not online here. jason@evoscreenprinting.com
That rug really tied the room together, did it not?

Offline DILLON

  • Verified/Junior
  • **
  • Posts: 48
Re: Full manual shop for sale - M&R and more - northern California
« Reply #11 on: October 27, 2011, 12:41:09 PM »
It happens all the time.  I am sure tony knows more about some of the larger shops around here buying smaller ones.  It can be done, and most businesses aren't purchasable frankly because most everything is in the boss's head.  When a key person leaves, it's a scramble.  But there are businesses that are worth more than just the equipment FYI.

Of course this is coming from a guy that paid $250K for a screen printing business and our CPA said it was worth double that.

So when you bought it was it worth = to the depreciated value of equipment? The CPA valued it twice what you payed?

I'm curious because I'm actually planning to build my business to sell it.

Sorry for being off topic, OP you have some sweet gear!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Full manual shop for sale - M&R and more - northern California
« Reply #12 on: October 27, 2011, 12:59:56 PM »
Dillon, get your ten posts in, get access to the restricted business section, and bring up this very topic.
That rug really tied the room together, did it not?

Offline Evo

  • Hero Member
  • *****
  • Posts: 953
  • Anything is possible.
Re: Full manual shop for sale - M&R and more - northern California
« Reply #13 on: October 30, 2011, 09:10:05 PM »
Tri-Loc, M3 frames, light table, large screen rack, spot gun and hat press have been sold locally.


Still for sale:

Press
Dryer
Smaller screen rack
Washout booth
Dip tanks
Epson
Squeegees

Final package price before I separate the above: $9500.00 if picked up.
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Full manual shop for sale - M&R and more - northern California
« Reply #14 on: October 30, 2011, 09:22:55 PM »
Tri-Loc, M3 frames, light table, large screen rack, spot gun and hat press have been sold locally.


Still for sale:

Press
Dryer
Smaller screen rack
Washout booth
Dip tanks
Epson
Squeegees

Final package price before I separate the above: $9500.00 if picked up.

how much for dip tanks , flash gone?