"Little" Gas Conveyor Dryer?

[mimosatexas]

Are there any "little" gas conveyor dryers that run off 110v? It seems like most 10' by 36" belt dryers (or close to that size) that are pure electric and not gas run around 50 to 60 amps on 220, while massive gas dryers run off much less electrical but augment that with gas usage. For shops that are limited when it comes to both space and electrical availability, are there any options out there that use gas? Seems like when you start using gas the dryers seem to get much bigger.

[Nation03]

I think Lawson has a small gas dryer. I don't know too much about it, or any of their equipment for that matter.

[244]

Are there any "little" gas conveyor dryers that run off 110v? It seems like most 10' by 36" belt dryers (or close to that size) run around 50 to 60 amps on 220, while massive gas dryers run off much less electrical but augment that with gas usage. For shops that are limited when it comes to both space and electrical availability, are there any options out there that use gas? Seems like when you start using gas the dryers seem to get much bigger.

a little more research is needed. I don't know of any gas fired dryer with a 38 inch belt from any manufacturer that pulls amps like that. Ours for instance pulls about 15 amps on 220 single phase. That should be about the average for a gas dryer of this size. 10 amps on 3 phase

[mimosatexas]

That was in reference to electric only dryers, not gas. I should have made that clearer. What models of gas dryer are out there that fit that form factor though (8 to 10 feet long with 36 to 48 inch belt)?

[244]

That was in reference to electric only dryers, not gas. I should have made that clearer. What models of gas dryer are out there that fit that form factor though (8 to 10 feet long with 36 to 48 inch belt)?

We made a dryer called the Heatwave that was 110 volt as well as one called Boomerang. Currently our smallest is the Mini- Sprint that is gas and 220 single phased

[mimosatexas]

What is the smallest size of the mini sprint? Aren't those still pretty large?

[Prosperi-Tees]

I think this is the smallest one out now.
http://www.tshirtprintersupply.com/shop/HG-3612.html

[244]

What is the smallest size of the mini sprint? Aren't those still pretty large?

38" wide belt and 8' of heat

[TCT]

You may want to check again mimosa, amperage like that on a gas dryer sounds crazy. We had a 38" belt red gas dryer that was 15A 220 single phase.

Even the 60" one we run now that has IR bumps is only 220 30A

Sent from my Nexus 6 using Tapatalk

[numbercruncher]

The new and improved Anatol Vulcan gas dryer is available with a 36"belt and 6' of heat - also available with 8.5' of heat

[numbercruncher]

Meant to add that the electrical specs for the Anatol Vulcan Dryer are single phase 15 amps, three phase 12 amps, burner is 280,000 btu -  let me know if there are other questions

[sqslabs]

We had the Heatwave prior to our current dryer and were pretty happy with it.  110v, small footprint, cured WB/discharge no problem and kept up with our Javelin.

[Frog]

What is the smallest size of the mini sprint? Aren't those still pretty large?

38" wide belt and 8' of heat

Overall length, 12', right?

[mimosatexas]

All great info. I'm going to look into this more seriously for my shop. I'm getting pretty sick of being so limited due to the electrical and need a new dryer anyway as my ancient National is pretty close to death.

Are there any random issues I need to think a out when switching from electric to gas? Different venting, proximity to walls or Bay doors, etc? Just want to make sure I don't overlook anything.

[cleveprint]

we switched in the winter of '15. we put in a 48" sprint. its more dryer than we need, but we could afford it and its nice having more space than needed on the belt. the only real expense that came out more than we planned on was the new vent. calling a roofer to cut the hole, then a tinner to do the vent, then the roofer to re-seal the roof. it wasn't an unexpected cost, but it worked out to more than we planned. but at that point, the dryer was there and i guess we had no choice!!