Author Topic: Re meshing static frame supplier in NH area?  (Read 1914 times)

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re meshing static frame supplier in NH area?
« on: June 21, 2016, 10:21:40 AM »
Anyone know of the company that can remesh static frames where you swap out or send in your old and they send you back the new ones?  This Co. Is in the Hampton NH/Salsbury Mass area.

Thanks
Dan
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com


Offline broadway

  • !!!
  • Full Member
  • ***
  • Posts: 204
Re: Re meshing static frame supplier in NH area?
« Reply #1 on: June 21, 2016, 11:28:29 AM »
Victory Factory in NY

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Re meshing static frame supplier in NH area?
« Reply #2 on: June 21, 2016, 12:01:29 PM »
"No man is an island"

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Re meshing static frame supplier in NH area?
« Reply #3 on: June 21, 2016, 12:49:13 PM »
I don't understand how this can be done.  I send you a used static for remeshing and you send me a new one?  At what cost?  What happens to the used frame I sent in?  Is it sent out as "new" to the next person?  If done properly then the remeshed screen frame is usable for a long time and many remeshes.
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Re meshing static frame supplier in NH area?
« Reply #4 on: June 21, 2016, 01:41:24 PM »
Most cases the used screens are machine grinded, re-meshed then shipped back.

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Re meshing static frame supplier in NH area?
« Reply #5 on: June 21, 2016, 01:42:42 PM »
Most cases the used screens are machine grinded, re-meshed then shipped back.
You are correct.  At Xenon we do not use any knid of abrasive on the frame.
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Re meshing static frame supplier in NH area?
« Reply #6 on: June 21, 2016, 02:10:04 PM »
Garston is in Haverhill, MA, (and Conn.) and Commercial Screen Supply is in Avon, MA...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Re meshing static frame supplier in NH area?
« Reply #7 on: June 26, 2016, 10:54:34 AM »
Thanks all!   Much appreciated.

I find now that for me, our forum is adding on another benefit for me and my customers. I've had several Corel questions answered,  tape, and mesh are jus a few I can remember. Things I wouldn't normally be asking for as an artist.

Some of my customers register for the site and I know many of them just lurk by they are there. ;)

Thanks for the support!
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com