Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison
We mix Epic PC colors at maximum pig load to start and then base back as desired. When we first brought the system in, the standard formulas were all reading very light and washed out on white Ts or over white base, upping the pigment solves it. Just clone the formula and copy/paste the "min base" figure into your user formula.
]The problem I see is your at max..load level and they were tested on 156 mesh on white.. printing over a base you cant drop your mesh to 156 unless your planning on flashing every color.
Hi AllWhite under bases do have an effect on the more transparent colours - try knocking back the bright whites with a bit of black and the under base will become more neutral - thus less light will refract through the over laid colour - if blues are causing the major problem in a print sequence - add a little bit of blue to under base white - just enough to take the brightness out of the under base white ?Philip Collins-ShoneArea Sales Manager, EMEA Specialty Inks and Polymer SystemsPolyOne CorporationPhilip.collins-shone@polyone.com