Author Topic: Gloves  (Read 1973 times)

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Gloves
« on: May 07, 2016, 07:16:07 AM »
Our performance wear shirts are hot when they come out of the oven.
I would like to get thin white cotton gloves for the people working behind the oven.
Where can I get these at a reasonable price?
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il


Offline Get Shirts

  • Hero Member
  • *****
  • Posts: 649
Re: Gloves
« Reply #1 on: May 07, 2016, 08:38:49 AM »
What about some rubber thimbles instead?  Better grip.


Sent from my iPhone using Tapatalk

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Re: Gloves
« Reply #2 on: May 07, 2016, 09:35:49 AM »
At the moment we are printing 5000 shirts both sides, that's at least 2 days printing, they need something comfortable.
We heated up the oven a little and ran it faster so the shirts are coming out hot.
Maybe I should put a fan over the belt at the end of the oven and cool the shirts down a bit.
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il

Offline mt_signex

  • Verified/Junior
  • **
  • Posts: 61
Re: Gloves
« Reply #3 on: May 07, 2016, 07:08:51 PM »
At the moment we are printing 5000 shirts both sides, that's at least 2 days printing, they need something comfortable.
We heated up the oven a little and ran it faster so the shirts are coming out hot.
Maybe I should put a fan over the belt at the end of the oven and cool the shirts down a bit.

My dryer (48" x 20' harco) has a unit that sets on the output with two small motors and 12" fans blowing down for that purpose, it makes a huge difference when doing performance wear.

Offline Get Shirts

  • Hero Member
  • *****
  • Posts: 649
Re: Gloves
« Reply #4 on: May 07, 2016, 08:06:42 PM »
Just make sure that air is not blowing back in the chamber.


Sent from my iPhone using Tapatalk

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Gloves
« Reply #5 on: May 07, 2016, 08:08:52 PM »
At the moment we are printing 5000 shirts both sides, that's at least 2 days printing, they need something comfortable.
We heated up the oven a little and ran it faster so the shirts are coming out hot.
Maybe I should put a fan over the belt at the end of the oven and cool the shirts down a bit.

My dryer (48" x 20' harco) has a unit that sets on the output with two small motors and 12" fans blowing down for that purpose, it makes a huge difference when doing performance wear.

This is what I have done in the past with dryers that don't have enough out-feed to keep shirts from falling onto themselves while still really hot. Like mentioned, slightly angled away from the heat chamber.
That rug really tied the room together, did it not?

Offline Lizard

  • Sr. Member
  • ****
  • Posts: 306
Re: Gloves
« Reply #6 on: May 07, 2016, 11:02:20 PM »
Our catchers wear the rubber dot cotton gloves from uline. They are around $10 per dozen.
Toby
 Shirt Lizard Charlotte, NC 704-521-5225

Offline BorisB

  • Sr. Member
  • ****
  • Posts: 377
Re: Gloves
« Reply #7 on: May 08, 2016, 02:17:46 PM »
we get cotton gloves at pharmacists