« previous next »
Pages: [1]   Go Down

Author Topic: What silicone?  (Read 1472 times)

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
What silicone?
« on: February 26, 2016, 10:56:49 AM »
I've never used silicone based ink and I believe it's the thing to go to for sweatshirts with lots of polyester.
Can someone recommend a brand and give any other advice about using silicone?
Logged
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3540
Re: What silicone?
« Reply #1 on: February 26, 2016, 11:01:57 AM »
Quote from: Maxie on February 26, 2016, 10:56:49 AM
I've never used silicone based ink and I believe it's the thing to go to for sweatshirts with lots of polyester.
Can someone recommend a brand and give any other advice about using silicone?

I think the two big ones are nazdar or rutland.
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: What silicone?
« Reply #2 on: February 26, 2016, 11:09:50 AM »
In my testing I much preferred the rutland silicon ink


Logged
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: What silicone?
« Reply #3 on: February 26, 2016, 11:33:30 AM »
Just tried the Rutland.

It is recommended only for VERY smooth surfaces.  I.e. Polyester.  It has ZERO matte down characteristics.  All silicone inks have Zero matte characteristics.

When printing the Rutland it is VERY reminiscent of XOLB 158 for how short bodied it is and how it LOVES to climb the squeegee.

Other than that, nice bright ink, very soft and flexible, awesome drape, also very expensive per gallon.
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: What silicone?
« Reply #4 on: February 26, 2016, 11:57:26 AM »
flashing every color is the turn off for me on silicone.  Just used wilflex UB grey and print plasti on top, no problems on anything yet.
Logged
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline AAMike

  • Full Member
  • ***
  • Posts: 207
Re: What silicone?
« Reply #5 on: February 26, 2016, 12:58:57 PM »
In the silicone world both Rutland and Dow performed well when I worked for Badger. Nearly every job was printed with silicone. Zero matte down characteristics is spot on. Also, once catalyzed, it would remain printable for up to 3 days if you kept it in the fridge when not on the press. It is expensive so mix wisely. We always ran it through 110 or 86. The barrier black would kill bleed through on sublimated poly. I can't stress this enough, keep the temp of the garment to 280. As an example, if you are printing a maroon poly performance t-shirt with white ink, you would print white, flash and print white again. No bleed through. I wouldn't print it again by choice because it is unforgiving. Very difficult to touch-up after the fact. My choice of ink on these garments would be barrier black in rutlands eko acrylic system with performance plastisol on top. Here is a link to the video I produced for Badger. That is not me in the video, but my old boss, Tom Lopina.

https://www.youtube.com/watch?v=PsDyEqx5ITU
Logged
Pages: [1]   Go Up
« previous next »