Servo with electric head press that run on single phase?? any options

[repogolfer]

Is there any press out there that will run on 1 phase that have servo drive and electric heads....or is this out of the question???

Jon

[Mr Tees!!]

...Sportsman EX 10/12, has a single phase option. We are stuck at single phase as well, so this is the ONLY press on our wish list, currently.

[ebscreen]

MHM S-Types, a 10/12 is 20 amp 220 single phase.
The Calmat flashes are single phase as well.

[Inkworks]

Workhorse Auto's, are single phase standard, M&R do single phase as an option too.

[repogolfer]

Well shoot...I have tons of options available.  I thought this was going to be super tough.

Now I just have to make sure I have enough amps available...Looks like I need about the same as my screw compressor.

[DannyGruninger]

Roq(formerly Sroque) can help you out with this as well.

[TCT]

Every company I had talked to before we bought would make a single phase one, just needed to ask...

[ZooCity]

On our 2013/14 Sportsman EX, it's a matter of swapping some electrical components- breakers and such.  Not hard to do and M&R has the parts.  So you could retrofit a 3ph machine to single if you wanted to pick up something used, fyi.

[Gilligan]

We have three phase and our Sabre still came single phase.

I guess I like that, the inverter is what is reading out the speed of the motor, not sure if that happens when it's on 3 phase... Probably does.

[numbercruncher]

The Anatol all electric VOLT is available in single or 3 phase  up to 12 colors/14 stations and a print area of up to 20x20". The infrared flashes are also available in single or three phase. There is no extra charge for this option.
Michael Jirasek
Anatol Equipment
mj@anatol.com

[numbercruncher]

The Anatol all electric VOLT is available in single or 3 phase  up to 12 colors/14 stations and a print area of up to 20x20". The infrared flashes are also available in single or three phase. There is no extra charge for this option.
Michael Jirasek
Anatol Equipment
mj@anatol.com

Meant to add - you don't have to worry about your compressor/chiller being single or three phase as none is needed

[Printficient]

The Anatol all electric VOLT is available in single or 3 phase  up to 12 colors/14 stations and a print area of up to 20x20". The infrared flashes are also available in single or three phase. There is no extra charge for this option.
Michael Jirasek
Anatol Equipment
mj@anatol.com

These are impressive presses.  There are 3 in Atlanta.  I have seen all three running.  Very smooth and adaptable.

[Gilligan]

Brings up a good point, a full quarts fash is gonna be huge on amperage at single phase.

Flash back on the Sabre is only singe phase as it doesn't need more.

[numbercruncher]

Brings up a good point, a full quarts fash is gonna be huge on amperage at single phase.

Flash back on the Sabre is only singe phase as it doesn't need more.

A good point as a compressor and chiller w/ mini quartz flashback(by the way what is the amp draw?) is likely to be similar to a full size flash.

[Gilligan]

I'm guessing without being at my shop 20 amps @220v.

My 7.5hp might actually be overkill for the small air requirements the Sabre needs but we use air for many other things in the shop and I can't imagine not having air (we blow out screens for faster drying, blow out the embroidery machine, full up the tires in the vehicles, blow out computers... I have drops all over for convenience.). But I think it's a single phase 30 amp circuit without looking.

But these are separate circuits... So the cabling isn't as robust and expensive either.

What does a single phase FULL size quartz flash draw?