Author Topic: Green Machine disdain  (Read 9889 times)

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Green Machine disdain
« Reply #45 on: February 23, 2016, 01:18:09 PM »
So we can expect our posts to be deleted if it doesn't fit the opinion of the board owners.  Cool.
My post merely stated my opinion.  I didn't buy a ROQ because of the behavior they consistently have that LITERALLY took place in this thread TODAY.


edit:  I should mention, I don't own an M&R press either.  (Besides a Kruzer that gets used once a month, maybe) For me, this isn't a Blue vs. Green stance.

this is after all our house and if I respectful ask for something I would hope that at least as a courtesy it is conformed to. Feel free to contact me personally and argue the merits of my decisions, but let's leave the mud slinging out of the public eyes!

Andy said it much better than I could, please reread his post.

ALL manufacturers, suppliers and the industry that serves us are welcome here.  They will all have an opportunity to blossom or hang themselves. They will even get a second chance. Having them here for one, pays the bills to keep the doors open, but more importantly, it provides us with a direct line of communication with ppl on the ground floor. There is ZERO preferential treatment based on the advertising or anything else. Rich has a stellar reputation here because he EARNED IT! Anatol was given a second chance and they did not do anything with it.  ROQ is coming onboard and instead of giving them a chance we are starting on the wrong foot. The points were made, what I believe to be valid points at that, but pounding is not helping, but just the opposite. We should welcome this as an opportunity to help us all out.

And just for the record, to eliminate any doubts, I am shopping for equipment as previously stated. I just bought something from M&R, and am looking at MHM, ROQ and M&R for the next press, MHM being most likely purchase. Anybody thinking that I will get a better deal because I defended them here on the forum is not thinking clearly. We have allowed negative information on here, the only requirement was that it was factual without mud slinging.

Anybody having issues with this feel free to contact me directly. I will gladly talk and explain my points. I will even admit when wrong and publicly correct any mistakes. It seems Shane is the only one of the posters that got our msg. . .

Anybody wishing to discuss this topic further please start a new thread where we can discuss the merits of our policies and actions.

Please keep this thread on topic of the Green Machine disdain . . .

pierre

EDIT: and the first post here proves me wrong as dirkdiggler was another person getting the msg!
« Last Edit: February 23, 2016, 01:44:27 PM by blue moon »
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!


Offline ryanmoor

  • Verified/Junior
  • **
  • Posts: 35
Re: Green Machine disdain
« Reply #46 on: February 23, 2016, 01:40:36 PM »

Awesome that you have joined in here Ryan, I challenge you to be more active here and help represent your brand and products.  It helps everyone, you included.
Thanks dirkdiggler! The amount of knowledge and industry pulse gained from these boards is impressive and imperative to people who work in screen printing.

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: Green Machine disdain
« Reply #47 on: February 23, 2016, 02:02:12 PM »

Awesome that you have joined in here Ryan, I challenge you to be more active here and help represent your brand and products.  It helps everyone, you included.
Thanks dirkdiggler! The amount of knowledge and industry pulse gained from these boards is impressive and imperative to people who work in screen printing.

Really only this board!  The others have information, but you have to weed through so much junk to find real answers.  The community here is the most knowledgeable in the industry IMO.  Would be nice to see you and your youtube videos geared more toward advanced techniques and not catering to mostly newbies.  Your voice is loud on the interwebs, it would only be better for all of us.
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline ryanmoor

  • Verified/Junior
  • **
  • Posts: 35
Re: Green Machine disdain
« Reply #48 on: February 23, 2016, 03:25:12 PM »

Awesome that you have joined in here Ryan, I challenge you to be more active here and help represent your brand and products.  It helps everyone, you included.
Thanks dirkdiggler! The amount of knowledge and industry pulse gained from these boards is impressive and imperative to people who work in screen printing.

Really only this board!  The others have information, but you have to weed through so much junk to find real answers.  The community here is the most knowledgeable in the industry IMO.  Would be nice to see you and your youtube videos geared more toward advanced techniques and not catering to mostly newbies.  Your voice is loud on the interwebs, it would only be better for all of us.
Awesome - we are on it - filming one tomorrow actually :) Now I will say this, I'm very excited to have our ROQ Eco back in action @ryonet HQ! Printing manually is definitely not as attractive anymore. Excited to be able to meet and learn from all of you!
« Last Edit: February 23, 2016, 06:49:27 PM by Ryanmoor »

Offline LoneWolf2

  • Sr. Member
  • ****
  • Posts: 283
Re: Green Machine disdain
« Reply #49 on: February 23, 2016, 08:17:28 PM »
My reaction coming back to the thread after today.