Author Topic: Anyone in Kalifornia looking for a cheap exposure unit  (Read 1973 times)

Offline IntegrityShirts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1179
Anyone in Kalifornia looking for a cheap exposure unit
« on: October 20, 2015, 11:05:04 AM »
http://www.ebay.com/itm/Exposure-Unit-Olec-Olite-AL53-100-/291593438132?hash=item43e452c3b4:g:09IAAOSw9mFWGqvY

Scrap the curtain/frame and build a DIY vacuum frame/glass. Great price for 5k watts of power!


Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #1 on: October 20, 2015, 01:18:10 PM »
If that thing works...best deal I've seen in a long time!  I'd scrap our LED unit in a heartbeat and use this in it's place.  I've been told by 3 different guys that have forgotten more about screen printing than I know that the Olec expo units are STILL the best light source available. 
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Online bimmridder

  • Gonzo Member
  • ******
  • Posts: 1877
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #2 on: October 20, 2015, 02:01:11 PM »
That set up as is would be good for a CTS user also. They are great lamps. Still have one as my backup. Used it for, God, too many years to admit. 
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #3 on: October 20, 2015, 03:54:20 PM »
That one on ebay does not seem to include an integrator, but I assume that they are available with a little effort.

I have one of those as well (with an AI 975 Integrator), and would sell it but don't want to deal with crating and all that. Someone local here in the SF Bay Area perhaps will get a deal some day.
The standard reflector does require some elbow room, but those are great light sources with a clever rotating "tin can with a hole" shutter.

edit: I take that back! No mention of an integrator, but a picture of the integrator manual.
« Last Edit: October 20, 2015, 04:01:14 PM by Frog »
That rug really tied the room together, did it not?

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
That rug really tied the room together, did it not?

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #5 on: October 20, 2015, 05:41:07 PM »
I've been told by 3 different guys that have forgotten more about screen printing than I know that the Olec expo units are STILL the best light source available.

Yes sir!!

Funny how we've come full circle with the stand alone exp units.. way back when we had large vacuum tables with that light being wheeled to different taped off zones on the floor... 25 yrs later we have CTS with that same light.. hmmm..

It's free for local pickup.. and I'm about 20 minutes from his house.. HA HAA!!


Blacktop Graphics Screenprinting and Consulting Services

Offline californiadreamin

  • !!!
  • Full Member
  • ***
  • Posts: 221
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #6 on: October 20, 2015, 07:23:32 PM »
Thanks Guys!
This was a no brainer.
The Kid and I are going to print a few posters or two.
Just fell into a Cameo 30 (mint), Cinciniati One Arm squeegee, C&P Paper cutter.
And now an Olec!
winston

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2071
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #7 on: October 20, 2015, 07:35:35 PM »
If that thing works...best deal I've seen in a long time!  I'd scrap our LED unit in a heartbeat and use this in it's place.  I've been told by 3 different guys that have forgotten more about screen printing than I know that the Olec expo units are STILL the best light source available.
Alan,
since you and I are both owners of the great Vastex LED unit I was wondering if we can exchange experiences and exposure times at one point. Might PM you this week.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #8 on: October 20, 2015, 07:48:21 PM »
Thanks Guys!
This was a no brainer.
The Kid and I are going to print a few posters or two.
Just fell into a Cameo 30 (mint), Cinciniati One Arm squeegee, C&P Paper cutter.
And now an Olec!
winston

You don't want to fall into that Cameo, as you know it has no safety cable. LOL!
That rug really tied the room together, did it not?

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #9 on: October 20, 2015, 07:50:11 PM »
Hopefully that listing wasn't fake. The seller had 0 transactions and now has another one for sale with the same pictures.

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #10 on: October 20, 2015, 07:58:33 PM »
^^Let's hope.
The listing he had up yesterday I was going to post here was for two hundred BIN. 

I've seen more than a few of those OV33 and OV45 units for sale real cheap in Cali. 
Crating and freighting was always way too much money though...

Offline IntegrityShirts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1179
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #11 on: October 21, 2015, 12:21:11 PM »
Thanks Guys!
This was a no brainer.
The Kid and I are going to print a few posters or two.
Just fell into a Cameo 30 (mint), Cinciniati One Arm squeegee, C&P Paper cutter.
And now an Olec!
winston

Sweet, Winston. You got it! Maybe I have partially paid you back for all the free dryer help you have given me.

Offline californiadreamin

  • !!!
  • Full Member
  • ***
  • Posts: 221
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #12 on: October 21, 2015, 12:32:46 PM »
Thanks Guys!
This was a no brainer.
The Kid and I are going to print a few posters or two.
Just fell into a Cameo 30 (mint), Cinciniati One Arm squeegee, C&P Paper cutter.
And now an Olec!
winston

Sweet, Winston. You got it! Maybe I have partially paid you back for all the free dryer help you have given me.


Nah! I probably will owe you.
the seller still hasn't contacted me yet, but I paid with card on ebay, so I am not so concerned.
I think it is from RG circuit shop, that closed in Escondido.
I will keep you posted.
Thanks,
winston

Offline californiadreamin

  • !!!
  • Full Member
  • ***
  • Posts: 221
Re: Anyone in Kalifornia looking for a cheap exposure unit
« Reply #13 on: October 21, 2015, 07:38:53 PM »
  I picked up Olec Today!
  Took the Complete unit, Integrator, Vacume Pump In Super Clean Condition
  Left the rest.
  Nice People! Super Nice Shop
  Have Run A Nice 3-4 Million Dollar Operation Per Year  Since The 1980's
  Said They Were Tired of ALL the Kalifornia Regulations, Competition From China.
  Most sad for 80+ employes who no longer have a job.
  Thanks Guys!
  winston