« previous next »
Pages: [1]   Go Down

Author Topic: Exhaust on 60" Radicure shutting off....9/2  (Read 760 times)

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Exhaust on 60" Radicure shutting off....9/2
« on: September 02, 2015, 11:35:02 AM »
Just talked to M&R service about this strange issue.
The exhaust fan on the top of our Radicure has randomly shut off two times today.
The fix for us was to go through our normal dryer shut down procedure..
And, as the dryer is in 'cool down' mode, the fan turns back on.... Weird.

Anyone experience any thing like this on a Radicure?
We are going to check the voltage on the motor  once we stop production for the day...

John


Logged

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Exhaust on 60" Radicure shutting off....9/2
« Reply #1 on: September 02, 2015, 12:10:48 PM »
Call Winston
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: Exhaust on 60" Radicure shutting off....9/2
« Reply #2 on: September 02, 2015, 03:45:17 PM »
Quote from: DCSP John on September 02, 2015, 11:35:02 AM
Just talked to M&R service about this strange issue.
The exhaust fan on the top of our Radicure has randomly shut off two times today.
The fix for us was to go through our normal dryer shut down procedure..
And, as the dryer is in 'cool down' mode, the fan turns back on.... Weird.

Anyone experience any thing like this on a Radicure?
We are going to check the voltage on the motor  once we stop production for the day...

John
Your problem is due to maintenance. There are louvers on the box that the blower is connected to. They are there to mix in a little ambient air and not have the motor overheat. Clean the louvers out and your problem will go away.
Logged
Rich Hoffman
Pages: [1]   Go Up
« previous next »