Author Topic: Bella B8800  (Read 1657 times)

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Bella B8800
« on: July 17, 2015, 03:29:10 PM »
What you guys using to print the black one?  Lots of trouble for me, but tons of requests for them.
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender


Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3539
Re: Bella B8800
« Reply #1 on: July 17, 2015, 03:34:44 PM »
What you guys using to print the black one?  Lots of trouble for me, but tons of requests for them.

we use poly white, with lower meshes, and typically with lower pressure. Alan had posted about it in a thread i had mentioned a while back.
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Bella B8800
« Reply #2 on: July 17, 2015, 03:46:49 PM »
Yup.  Performance White on kelly, black, etc.   We'll print it through a 270 where needed but that's a lot of screens or revolves.  Boo.

Regular plasti is fine on the lighter tones so far.  Printing a grip of these lately it seems like.


Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3539
Re: Bella B8800
« Reply #3 on: July 17, 2015, 03:49:43 PM »
Also we've found blocking base helps a TON
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Bella B8800
« Reply #4 on: July 17, 2015, 04:17:11 PM »
You could try the revamped Mustang series.
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline CSPGarrett

  • Full Member
  • ***
  • Posts: 123
Re: Bella B8800
« Reply #5 on: July 17, 2015, 04:49:23 PM »
Funny you mention, we have a huge run of these in Pink to run next week, and we asked tech support the same question.  I was going to run one off with a low bleed base and see if it has issues before running the full job.
Real Quality Merchandising.  - Printing & Fulfillment Services.  Contract DTG & Screen Printing. www.customshirtprints.com

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Bella B8800
« Reply #6 on: July 17, 2015, 04:54:19 PM »
Pink doesn't bleed with Quick. We're on our second thousand piece run of them.

They resist tack though, and I hate them.

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: Bella B8800
« Reply #7 on: July 17, 2015, 10:25:40 PM »
We print them everyday, and they resist tack like a mofo! I HATE THEM.  But any white we use seems to fail.  They are so thin you cant really prints UB grey or whatever.
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline ol man

  • Sr. Member
  • ****
  • Posts: 295
Re: Bella B8800
« Reply #8 on: July 18, 2015, 07:47:04 AM »
i'll second sonny --ive used a couple gallons of mustang recently and had good results