« previous next »
Pages: [1]   Go Down

Author Topic: How long before a screen breaks down  (Read 1169 times)

Offline studog

  • !!!
  • Verified/Junior
  • **
  • Posts: 94
  • I am back
How long before a screen breaks down
« on: September 22, 2011, 06:14:30 PM »
On printing large jobs how long on average should/does a screen last before breaking down?
Logged

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: How long before a screen breaks down
« Reply #1 on: September 22, 2011, 06:40:37 PM »
I've never had one break down, but we've also never done really long runs.  Biggest run we've ever done was 10K and those screens held up without any sign of weakening.
Logged
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How long before a screen breaks down
« Reply #2 on: September 22, 2011, 06:44:18 PM »
And if you are concerned, there are hardeners you can wipe on after development and drying.
Logged
That rug really tied the room together, did it not?

Offline squeegee

  • Sr. Member
  • ****
  • Posts: 379
Re: How long before a screen breaks down
« Reply #3 on: September 22, 2011, 08:04:35 PM »
and post exposure will help too, especially if your emulsion is an SBQ, that's a tip I got off of Ulano's Paul Drago, great tech support.  our screens almost never break down, correct exposure is key.
Logged
Pages: [1]   Go Up
« previous next »