Author Topic: Printing Bandanas  (Read 3921 times)

Offline LuckyFlyinROUSH

  • !!!
  • Sr. Member
  • ****
  • Posts: 334
Printing Bandanas
« on: June 05, 2015, 06:34:20 PM »
We've printed some crazy stuff....but my guys are against printing bandanas for some reason?

Any reasons I should stay clear of 22" cotton bandanas? Seem like it would be easier than printing shirts?

5-9 color print
I spend too much money on equipment...


Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3538
Re: Printing Bandanas
« Reply #1 on: June 05, 2015, 06:41:32 PM »
we hate printing them as well.

Usually the material is super thin, shrinks under the flash and in the dryer if you aren't careful, also printing up to those frayed corners/rimmed corners sucks.
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Printing Bandanas
« Reply #2 on: June 05, 2015, 06:43:46 PM »
I've printed these plenty of times, though always one color or two colors with loose registration and also by hand.  I would assume if you are setup for a 22"x22" print and waterbased inks there would be no reason not to...am i missing something?  They are thin, but they are almost as quick as a shirt to line up and smooth out.  They do tend to curl a little on the edges in the dryer.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Printing Bandanas
« Reply #3 on: June 05, 2015, 06:53:31 PM »
Thin poly blends can be more of a problem than cotton
« Last Edit: June 08, 2015, 10:10:17 AM by Frog »
That rug really tied the room together, did it not?

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Re: Printing Bandanas
« Reply #4 on: June 05, 2015, 07:14:24 PM »
We print these all the time, although we limit the print size to 16.5x16.5 as our biggest pallet is 17".  My bandana of choice is the Tan's Club Premium Lock Edge, which have never given me any dye migration issues. Inkwise, for white prints I used Matsui 301W for years but recently switched to the Green Galaxy white waterbased.  Both inks offer a double hit, no flash, bright white but the GG is better in the screen.  For lights we'll use either standard waterbased or super reduced plastisol to keep the prints nice and soft.  I try to stick to one color prints, although we have done more in the past. 

Pic attached of a single color we did recently.
« Last Edit: June 05, 2015, 07:16:38 PM by sqslabs »
Brett
Squeegee Science
Fort Lauderdale, FL

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: Printing Bandanas
« Reply #5 on: June 06, 2015, 01:37:14 AM »
I've only printed them a few times. They print as fast as shirts if not faster. That is as long as they are not creasted or have a ton of wrinkles. I have printed gold plastisol ink on maroon, black and white with no flash and just a double stroke. They looked great.  They are also easy to deal with. 500 of them fit in a tiny box and are easy to sort.

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Re: Printing Bandanas
« Reply #6 on: June 06, 2015, 07:08:18 AM »
We print a lot of them.
You need to make sure they are flat, we normally receive them folded and have to open them and flatten them as much as possible.
We can print shirts much faster then bandannas, they are thin and you have to lay them on the platter carefully.
Most of the time we only print one color.
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: Printing Bandanas
« Reply #7 on: June 06, 2015, 08:14:05 AM »
printed thousands of them 8 color design, it sux beyond sucking, steer clear if you can.
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline LuckyFlyinROUSH

  • !!!
  • Sr. Member
  • ****
  • Posts: 334
Re: Printing Bandanas
« Reply #8 on: June 06, 2015, 10:27:27 AM »
Sounds like I'll price high and hope we don't get it! Wish we had some more time to play with WB DC.
I spend too much money on equipment...

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Re: Printing Bandanas
« Reply #9 on: June 06, 2015, 05:49:40 PM »
The last one I printed from sanmar was 50/50 migrated horribly , so I bought some top score pfp sweet. one color.
Shane

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Re: Printing Bandanas
« Reply #10 on: June 08, 2015, 10:02:51 AM »
The last one I printed from sanmar was 50/50 migrated horribly , so I bought some top score pfp sweet. one color.
Shane

Sanmar bandanas are the worst.  Used them once in a pinch, never again.  Tan's Club Premium bandanas are cheaper and give no migration issues.
Brett
Squeegee Science
Fort Lauderdale, FL

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6054
Re: Printing Bandanas
« Reply #11 on: June 08, 2015, 12:00:24 PM »
They have a learning curve; we always did them with waterbased, plastisol is just kind of gross for those (IMHO). You really need air in your dryer too.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline ol man

  • Sr. Member
  • ****
  • Posts: 295
Re: Printing Bandanas
« Reply #12 on: June 08, 2015, 01:46:56 PM »
discharge is the only way to print bandannas,,,

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Printing Bandanas
« Reply #13 on: June 08, 2015, 04:40:05 PM »
discharge is the only way to print bandannas,,,

here here!  Which ones discharge?  I've had no luck getting reactive dyed from any of our U.S. vendors but enough requests from clients to really want to find a source.

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4277
Re: Printing Bandanas
« Reply #14 on: June 08, 2015, 04:42:27 PM »
Bandanaman's will discharge.

The creases are what stop us from trying to push more of these.