Author Topic: Anatol Vindicator for sale  (Read 2038 times)

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 575
Anatol Vindicator for sale
« on: March 17, 2015, 09:43:50 AM »
We are selling our 2001  Anatol Vindicator

unknown amount of prints as the computer was replaced a few years back

its a 12 color press with 11 working heads

the press has a damaged carousel which bent a print arm.  we were using the press recently and it prints and cycles without issue, but some platens will print out of register.

press comes with an Accutemp flash.

the press is good for parts or to fix.

located in Dover, New Hampshire

make an offer.

ddotton@jsrdirect.com
« Last Edit: March 17, 2015, 09:47:11 AM by Zelko-4-EVA »


Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Anatol Vindicator for sale
« Reply #1 on: March 17, 2015, 11:22:20 AM »
This is the all servo press from Anatol.  That is servo index, lift and print. 
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5694
Re: Anatol Vindicator for sale
« Reply #2 on: March 18, 2015, 09:05:19 AM »
Ouch Duane. are you replacing the press?

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 575
Re: Anatol Vindicator for sale
« Reply #3 on: March 18, 2015, 09:57:32 AM »
Ouch Duane. are you replacing the press?

12 color Gauntlet 3 is going in its place - we need to be able to share platens, squeegees/floodbars between presses.

The vindicator needs to be gone by the second week of April.

d

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 575
Re: Anatol Vindicator for sale
« Reply #4 on: March 25, 2015, 10:45:26 AM »
if no one wants it, we are going to strip it for parts and bring it to a metal recycling place.


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5694
Re: Anatol Vindicator for sale
« Reply #5 on: March 25, 2015, 11:38:34 AM »
Still got the Trident?

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 575
Re: Anatol Vindicator for sale
« Reply #6 on: March 25, 2015, 12:44:43 PM »
Still got the Trident?

yeah - it runs okay...   registration is fine, prints okay...