Author Topic: Wanting to get away from mineral spirits in the parts washer  (Read 4008 times)

Offline push_pull

  • Verified/Junior
  • **
  • Posts: 19
Wanting to get away from mineral spirits in the parts washer
« on: February 12, 2015, 08:43:12 PM »
Hey guys,

I want to green-up some of my practices this year, and I'd like to start with the parts washer filled with mineral spirits.  Typically, ink is carded off at the press, screen is de-taped, then scrubbed up in the parts washer before reclaim.  We also use the parts washer to unclog screens that have had image areas taped off that became gunked with ink that need to be re-used.

Are there any chemicals out there that will drop right in to this scenario while still being a friendlier option?


Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Brett
Squeegee Science
Fort Lauderdale, FL

Offline push_pull

  • Verified/Junior
  • **
  • Posts: 19
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #2 on: February 12, 2015, 09:59:47 PM »
I've been loosely following that technology, and it's very cool.  I'd be interested in hearing what others are using besides bioremediation.  Soy based? Citrus based?  I'm having a hard time keeping up with each company's three-digit four-letter product name..

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Wanting to get away from mineral spirits in the parts washer
« Reply #3 on: February 12, 2015, 11:56:58 PM »
I used the citrus ink remover it works pretty good, the Franmar soy stuff is a little bit better in my opinion. 
Edit ... But I have not used the stuff in a parts washer just a bucket.
« Last Edit: February 12, 2015, 11:59:14 PM by sweetts »
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #4 on: February 13, 2015, 07:30:29 AM »
Xenon Plastiwash is good for a wash out tank.  We have other products as well.
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #5 on: February 13, 2015, 08:43:55 AM »
we ran plastiwash before a smartwasher...i will go update the thread i started and list out the advantages of each.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #6 on: February 13, 2015, 10:22:32 AM »
If you own a parts washer already, I'd just switch the chems to the smart washer stuff and come up with a simple heating method.

Wouldn't cost you nearly as much.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #7 on: February 13, 2015, 10:36:15 AM »
umm, not that simple...

first, this stuff isn't the kindest to ferrous metal.  So the inside of a metal parts washer would rust.  also, the pump itself might need to be changed as well since it might corrode.

the ozzymats also have microbes in them, so you would have to make sure you could fit the mats into your system.

i understand trying to save a buck...but just spend the money to save it on firing safety-kleen. 

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #8 on: February 13, 2015, 03:49:48 PM »
I don't pay Safety-Kleen, I have my own parts washer.

So is your parts washer plastic?

Offline push_pull

  • Verified/Junior
  • **
  • Posts: 19
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #9 on: February 13, 2015, 08:12:57 PM »
I don't pay Safety-Kleen, I have my own parts washer.

So is your parts washer plastic?

Just a plain ol' metal tub with a recirc pump.

Offline push_pull

  • Verified/Junior
  • **
  • Posts: 19
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #10 on: February 13, 2015, 08:13:21 PM »
Xenon Plastiwash is good for a wash out tank.  We have other products as well.

How does it do against tape clogs?

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #11 on: February 14, 2015, 12:43:17 AM »
I don't pay Safety-Kleen, I have my own parts washer.

So is your parts washer plastic?

Just a plain ol' metal tub with a recirc pump.

I was wondering about Brad and the official one.

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #12 on: February 14, 2015, 12:55:47 PM »
I was wondering about Brad and the official one.

The Smartwasher is made from plastic.
Brett
Squeegee Science
Fort Lauderdale, FL

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #13 on: February 14, 2015, 06:23:27 PM »
55 gallon drum cut in half woul work for the diy crowd.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Wanting to get away from mineral spirits in the parts washer
« Reply #14 on: February 15, 2015, 11:07:23 PM »
i had a parts washer that wasn't serviced by safety kleen either.  dealing with the sludge was a pain...scooping, curing, cleaning...and so on.

i certainly won't go back...i prefer this system over solvent based systems...hands down.