« previous next »
Pages: [1] 2   Go Down

Author Topic: How do I screen print on sweaters?  (Read 3926 times)

Offline nismoasfuh

  • Verified/Junior
  • **
  • Posts: 23
How do I screen print on sweaters?
« on: December 07, 2014, 04:28:44 PM »
Hey guys, been a huge lurker for quite a while now. Finally decided to join up! I have to run a job tomorrow that requires silver metallic ink on blue hoodie/sweaters. I have never printed on a thick material like this. And not to mention that my silver metallic is the softest/ wateriest ink i have ever used. Are there any tips you guys can offer me for printing on hoodies/sweaters with a really soft ink? I might even have to flash it as the silver on the blue wont be fully opaque unless i do so. Just looking for any input really before i tackle this tomorrow morning.

Thanks!
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How do I screen print on sweaters?
« Reply #1 on: December 07, 2014, 04:40:53 PM »
First off, welcome.
Second, what ink are you using and what mesh? (or what mesh had you planned?)
Fleece only jobs can often benefit from a slightly coarser mesh than the same print on a T would take.
It is still likely that you may need to print-flash-print this.

If you have never done fleece before, prepare for a little more work sticking them down than T's took.
What adhesive are you using? With sprays, for instance, it is not uncommon to spray each time.
With waterbased, really frequent de-linting and rejuvenation is par for the course.
Logged
That rug really tied the room together, did it not?

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 619
Re: How do I screen print on sweaters?
« Reply #2 on: December 07, 2014, 05:05:07 PM »
What Frog said and you may want to burn a screen to under base the metallic. You may or may not need it, but can't hurt.
Logged
Tees and Coffee

Offline jhinkle

  • Verified/Junior
  • **
  • Posts: 13
Re: How do I screen print on sweaters?
« Reply #3 on: December 07, 2014, 05:07:26 PM »
i suggest putting down a base as it will make the ink standout more.
More and important than that is make sure you have enough off-contact or you will be pulling the ink right off the shirt when the screen lifts up making your prints ROUGH
Logged
Jeremy Hinkle
manager/lead printer
Bluecotton.com

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: How do I screen print on sweaters?
« Reply #4 on: December 07, 2014, 07:32:04 PM »
Just echoing here, but welcome and what ink is it? I'm not sure if they make it anymore, but I had some International Coatings metallic from when we opened, and it was a pain to cure. From my understanding the "metallic characteristics" specs or whatever were not plastic and were actually reflecting the heat from our dryer(electric) at the time. A gas dryer fixed the problem, but that is kind of a extreme solution ;)
Logged
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How do I screen print on sweaters?
« Reply #5 on: December 07, 2014, 08:12:45 PM »
Quote from: TCT on December 07, 2014, 07:32:04 PM
Just echoing here, but welcome and what ink is it? I'm not sure if they make it anymore, but I had some International Coatings metallic from when we opened, and it was a pain to cure. From my understanding the "metallic characteristics" specs or whatever were not plastic and were actually reflecting the heat from our dryer(electric) at the time. A gas dryer fixed the problem, but that is kind of a extreme solution ;)

I cut my metallic teeth with Union's Silver Metallic and a four foot Ranar Scamp, so with care and a little more time, it can cure just fine, but yes, the tech sheet does warn that one must compensate for the inherent reflectivity.
btw, that ink had the misfortune of exhibiting  the worst characteristics of both thick and thin inks! Stiff when printing, and thin, and wanting to flow through open areas when sitting.
Logged
That rug really tied the room together, did it not?

Offline nismoasfuh

  • Verified/Junior
  • **
  • Posts: 23
Re: How do I screen print on sweaters?
« Reply #6 on: December 08, 2014, 09:51:50 AM »
Wow! Thanks for the welcomes and the great information and replies. I'm using Union ink  Ef bright silver shimmer, and textac adhesive.
Logged

Offline tonyt79

  • Full Member
  • ***
  • Posts: 222
Re: How do I screen print on sweaters?
« Reply #7 on: December 08, 2014, 10:03:12 AM »
I use that same ink alot. I have not noticed any issues with curing. But had issues with opacity. Sometimes I even had to print,flash,print,flash,print on them
Logged

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: How do I screen print on sweaters?
« Reply #8 on: December 08, 2014, 10:22:06 AM »
With plastisols, we never underlay metallics, they are always opaque enough. Many years ago we used water-based metallics, which I feel look better than most of the metallic plastisols I've seen, and they also covered very well. The metal flake is what makes it opaque...

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: How do I screen print on sweaters?
« Reply #9 on: December 08, 2014, 10:28:10 AM »
Mesh count is the big one. 

Shimmer is pretty forgiving on that, IIRC.  (Wonderful that it's been this long... :))

Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How do I screen print on sweaters?
« Reply #10 on: December 08, 2014, 10:45:02 AM »
Union specifies something like 65-85 as a mesh count. That's really coarse! If that doesn't cover with a p-f-p, nothing will.
I have never gone coarser than 110, but have only used One Stroke and IC shimmers.

I have underbased, and not underbased, and have still not decided which looked better (and justified the extra screen as I usually do pretty short runs)
Logged
That rug really tied the room together, did it not?

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: How do I screen print on sweaters?
« Reply #11 on: December 08, 2014, 11:09:01 AM »
we use Wilflex Liquid silver here, and have had great results with pfp on a 156.. underbasing made the silver lose some of it's sparkle for some reason...
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5324
Re: How do I screen print on sweaters?
« Reply #12 on: December 08, 2014, 11:18:11 AM »
I second Steve, we never underbase metallic inks, we just use a 110 or 86 mesh count and pfp using a 60 duro squeegee.

darryl
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How do I screen print on sweaters?
« Reply #13 on: December 08, 2014, 11:18:45 AM »
Quote from: jvanick on December 08, 2014, 11:09:01 AM
we use Wilflex Liquid silver here, and have had great results with pfp on a 156.. underbasing made the silver lose some of it's sparkle for some reason...

I believe that's a true metallic, have you noticed tarnishing down the line? (or do you overcoat it?)
Logged
That rug really tied the room together, did it not?

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: How do I screen print on sweaters?
« Reply #14 on: December 08, 2014, 11:24:05 AM »
yup... it'll definitely tarnish after a bunch of washing

we've overcoated with Wilflex Soft Hand clear with good results.
Logged
Pages: [1] 2   Go Up
« previous next »