« previous next »
Pages: [1] 2   Go Down

Author Topic: Another way to do it  (Read 4466 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Another way to do it
« on: November 19, 2014, 07:38:30 AM »
What many do not know
Logged

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Another way to do it
« Reply #1 on: November 19, 2014, 07:53:36 AM »
Tony, do you have video of it. I've seen it and it's crazy.
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Another way to do it
« Reply #2 on: November 19, 2014, 08:03:36 AM »
Sorry Dave no. This is obviously an empty factory I believe early hours before production. Then its literally a Chinese Fire Drill. Been doing it this way for decades and still do.
 Labor=cheap, Autos=expensive.
Logged

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Another way to do it
« Reply #3 on: November 19, 2014, 08:08:40 AM »
I saw one like this. Not as fancy. Take your wood frame, print a piece, move to the next one, on down the line. crazy fast too.

On another note, and I RARELY get to say this....it's "warmer" here this morning than there.   :o
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Another way to do it
« Reply #4 on: November 19, 2014, 08:20:20 AM »
YouTube search: "Table Screen Printing" and you'll see this and "A-Frame" styled setups.

I did it last night, coincidentally.
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Another way to do it
« Reply #5 on: November 19, 2014, 08:23:22 AM »
Takes eight people to print eight colors plus an unloader/loader behind them. They also have some interesting curing methods. Pretty darn clever actually.
Logged

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Another way to do it
« Reply #6 on: November 19, 2014, 08:48:12 AM »
So far, I've only seen it done on pre-sewn goods, not Tees. But I'm still new to the idea.

Fascinating.

I'd assumed the travelling heat panels I've seen were merely flash units, Tony. Maybe they CAN do a full cure?
Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Another way to do it
« Reply #7 on: November 19, 2014, 08:53:36 AM »
They do full cures with them as well.
Logged

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Another way to do it
« Reply #8 on: November 19, 2014, 08:59:00 AM »
Quote from: Gilligan on November 19, 2014, 08:53:36 AM
They do full cures with them as well.

Makes a lot more sense....
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Another way to do it
« Reply #9 on: November 19, 2014, 09:06:26 AM »
This is part of one of many facilities. Many acres in size. Knitting/cutting department/decorating departments/sewing/finishing. Pretty much nothing like its done here. Back in the day we decorated similarly with huge belt printers which automated the process but it proved too costly and it went back to offshore table printing.
Logged

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Another way to do it
« Reply #10 on: November 19, 2014, 09:35:52 AM »
Few years back I looked into this a bit & found some blueprints on the interweb, very simple build & the screens set into place with pin & rivet system. Pretty simple idea, but cool nun the less.

Murphy37
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Another way to do it
« Reply #11 on: November 19, 2014, 10:33:54 AM »
Doing so much with so little, I just got thru taking with my wife about doing so much with what you got, no fancy press, using sunlight to expose screens, no 40 n newman frames, s mesh, just plain old screen printing, but I'm sure some sez it can't be done that way LOL. I would love to walk in one of those factories and watch them work.

darryl
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Another way to do it
« Reply #12 on: November 19, 2014, 11:04:59 AM »
BTW Some of these factories are producing high end couture $50-$70 retail. You should see them hand apply Swarovsky rhinestones
Logged

Offline kingscreen

  • Gonzo Member
  • ******
  • Posts: 1161
Re: Another way to do it
« Reply #13 on: November 19, 2014, 03:49:58 PM »
Quote from: tonypep on November 19, 2014, 11:04:59 AM
You should see them hand apply Swarovsky rhinestones

 :o
Logged
Scott Garnett
King Screen

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Another way to do it
« Reply #14 on: November 21, 2014, 07:40:32 AM »
They work hard over there so this is occasionally allowed
Logged
Pages: [1] 2   Go Up
« previous next »