« previous next »
Pages: [1]   Go Down

Author Topic: Exposure Maintenance  (Read 1627 times)

Offline JackThrasher

  • Verified/Junior
  • **
  • Posts: 34
Exposure Maintenance
« on: September 25, 2014, 02:27:02 PM »
What are you using to condition your neoprene blankets on exposure units?
Logged
Jack Thrasher
Owner Operator, The Original Whiskey Gun Clothing
https://www.facebook.com/TheOriginalWhiskeyGun

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1878
Re: Exposure Maintenance
« Reply #1 on: September 25, 2014, 03:16:26 PM »
I think it's more a matter of keeping them clean versus doing anything to them.
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5675
Re: Exposure Maintenance
« Reply #2 on: September 25, 2014, 03:28:27 PM »
Some use a second sheet of neo to protect the actual blanket. Any dense black fabric will do and its cheaper to replace when it gets mucked up.
Logged

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Exposure Maintenance
« Reply #3 on: September 25, 2014, 03:35:51 PM »
I have 4 5" squares of 3mm neoprene that I place on the corners of the frame before closing the lid and turning on the vacuum.  Other than that, don't let it get too dirty or wet and I have a fan that keeps it from overheating if I'm doing a ton of screens.  There really isn't much to most exposure units...
Logged

Offline JackThrasher

  • Verified/Junior
  • **
  • Posts: 34
Re: Exposure Maintenance
« Reply #4 on: September 25, 2014, 03:36:06 PM »
Ours has a spot on the top that is soft and tacky... Seems to be breaking down for some reason
Logged
Jack Thrasher
Owner Operator, The Original Whiskey Gun Clothing
https://www.facebook.com/TheOriginalWhiskeyGun

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Exposure Maintenance
« Reply #5 on: September 25, 2014, 03:37:50 PM »
It there anything environmental that is specific to that spot on the blanket?  Light/heat/moisture/pressure/stress/etc
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Exposure Maintenance
« Reply #6 on: September 25, 2014, 03:39:13 PM »
A lot of it is avoiding the wear from corners of frames. Strategically placed scraps of cloth or neoprene from old blankets can really help.

Your soft and tacky spot sounds like possible chemical contamination. Could your emulsion be less tha completely dry sometimes?
Logged
That rug really tied the room together, did it not?

Offline JackThrasher

  • Verified/Junior
  • **
  • Posts: 34
Re: Exposure Maintenance
« Reply #7 on: September 25, 2014, 06:51:20 PM »
I believe it's our general placement of screens... As for chemical contamination it's hard to judge as we have Four guys running about 100 frames a day... About 33 a piece...
Logged
Jack Thrasher
Owner Operator, The Original Whiskey Gun Clothing
https://www.facebook.com/TheOriginalWhiskeyGun

Offline Evo

  • Hero Member
  • *****
  • Posts: 950
  • Anything is possible.
Re: Exposure Maintenance
« Reply #8 on: September 25, 2014, 07:02:30 PM »
Only thing I've heard is excessive ozone in the shop environment can quickly degrade the neoprene.

Other than that, keep it clean. Some stretchy cloth over the screen helps. Even a couple t-shirts.

Wipe the top with a damp cloth once a week or so to keep dust off it. If you want to go crazy, Armor-All it once a year.
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline Shanarchy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1421
Re: Exposure Maintenance
« Reply #9 on: September 26, 2014, 10:11:00 PM »
For keeping it clean I throw a contractor bag over the screen to keep the blanket clean. WHen the bag starts to get icky, I toss it.
Logged

Offline bulldog

  • !!!
  • Sr. Member
  • ****
  • Posts: 490
  • Brandon
Re: Exposure Maintenance
« Reply #10 on: September 27, 2014, 05:06:35 PM »
Quote from: Shanarchy on September 26, 2014, 10:11:00 PM
For keeping it clean I throw a contractor bag over the screen to keep the blanket clean. WHen the bag starts to get icky, I toss it.

Hmm...that's not a bad idea. I have gotten some ink on my blanket and it pains me.
Logged
Pages: [1]   Go Up
« previous next »