Author Topic: When to use 2 white screens  (Read 4168 times)

Offline studog

  • !!!
  • Verified/Junior
  • **
  • Posts: 94
  • I am back
When to use 2 white screens
« on: August 25, 2011, 01:40:33 PM »
On an auto at what number of shirts do you use 2 white screens or do you always or never?I am trying to figure out the magic number as to when it is cost effective.  ;)


Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: When to use 2 white screens
« Reply #1 on: August 25, 2011, 01:42:57 PM »
On an auto at what number of shirts do you use 2 white screens or do you always or never?I am trying to figure out the magic number as to when it is cost effective.  ;)

100 or more is what we have been doing. 
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: When to use 2 white screens
« Reply #2 on: August 25, 2011, 01:45:04 PM »
we did a time study and out number is about 86 shirts...but like Brandt it is about 100 or more we make 2...

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: When to use 2 white screens
« Reply #3 on: August 25, 2011, 01:54:25 PM »
about 50. It also depends on how busy we are. If we are pressed for time, we'll burn two for 30 (registration is often not necessary with the film position unit we use).

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: When to use 2 white screens
« Reply #4 on: August 25, 2011, 01:58:44 PM »
When discharge is not an option.

Offline Clark

  • Sr. Member
  • ****
  • Posts: 265
Re: When to use 2 white screens
« Reply #5 on: August 25, 2011, 02:08:02 PM »
We do on pretty much every job.  But anytime white is showing we bill it at 2 colors.

Offline squeegee

  • Sr. Member
  • ****
  • Posts: 379
Re: When to use 2 white screens
« Reply #6 on: August 25, 2011, 04:06:56 PM »
36 or more pcs 2 screens, less than 36 manual or auto p/f/p with one screen.

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: When to use 2 white screens
« Reply #7 on: August 25, 2011, 04:18:40 PM »
36 or more pcs 2 screens, less than 36 manual or auto p/f/p with one screen.

Same here unless its a sample for a retailer. If its a sample they are paying for the press time so it goes on the auto.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: When to use 2 white screens
« Reply #8 on: August 25, 2011, 05:39:55 PM »
I've done the math for our shop and it's around 144 shirts for us.  Due to the press speed we can run so many more shirts going around twice than the 15-20 minutes it takes to put another screen into production and reclaim it so our number may seem high to some.  144 with 2 revolutions is only about 18-19 minutes of press time for us and I've figured adding another screen into production takes about that time to produce, setup and reclaim.

I made a chart figuring all this up but I can't find it right now.  It's based on our press speed and screen production/reclaim so it won't really work for everyone.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Lizard

  • Sr. Member
  • ****
  • Posts: 306
Re: When to use 2 white screens
« Reply #9 on: August 25, 2011, 07:50:16 PM »
Around 60 for us.
Toby
 Shirt Lizard Charlotte, NC 704-521-5225

Offline Fresh Baked Printing

  • Hero Member
  • *****
  • Posts: 755
  • "Tattoo Free Since 1965"
Re: When to use 2 white screens
« Reply #10 on: August 25, 2011, 09:46:46 PM »
Would somebody mind telling me what this means? Is this something specific to autos?
50% of the time I'm 100% right.
http://www.spiffylab.com

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: When to use 2 white screens
« Reply #11 on: August 25, 2011, 09:53:57 PM »
If its a light colored garment I'll run one white, on darks 100, above that I 'll break out 2 whites screens if possible.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Fresh Baked Printing

  • Hero Member
  • *****
  • Posts: 755
  • "Tattoo Free Since 1965"
Re: When to use 2 white screens
« Reply #12 on: August 25, 2011, 09:57:02 PM »
If its a light colored garment I'll run one white, on darks 100, above that I 'll break out 2 whites screens if possible.

Darryl

This refers to a highlight white?
50% of the time I'm 100% right.
http://www.spiffylab.com

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: When to use 2 white screens
« Reply #13 on: August 25, 2011, 10:00:30 PM »
Would somebody mind telling me what this means? Is this something specific to autos?

I believe that yes, pretty much printers using autos, deciding when rather than sending shirts around twice for a p-f-p, it's economically advantageous to just run a second white screen after the flash.
That rug really tied the room together, did it not?

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: When to use 2 white screens
« Reply #14 on: August 25, 2011, 10:02:17 PM »
They are referring to having 2  white screens to prevent having to have the automatic press revolve around twice to do a PFP of the same design