AC Heads...

[Prosperi-Tees]

What is run by air on a servo/ac press? Lift/lower, frame locks and sq/fld locks?

[jvanick]

Choppers are run by air too

[bimmridder]

Depending on press, there may be no lift and lower

[ScreenPrinter123]

For presses with tables that do lift they are usually air, though there are some with servo lift.

[Gilligan]

"Some"?  You sure there is more than one? :p

[ScreenPrinter123]

"Some"?  You sure there is more than one? :p

2M has one as does Anatol (at least on the Vindicator not sure if on other presses too).  Not sure if Rick is offering the RPM with the servo lift but I know Mariusz would put it on one if Rick asked.

[spotcolorsupply]

"Some"?  You sure there is more than one? :p

I was under the impression there were at least 2... (RPM, Anatol)... Maybe Playtex??

Edit... ScreenPrinter123 beat me to it

[GraphicDisorder]

Sorry but all I hear right now is:

AREEEEDUBYABEEE  saying: "I want you to experience servo lift". 

[Gilligan]

Sorry, I didn't mean offered, I meant in production.

Was also meant as a small jab at Michael and Brian.

[mk162]

are the newer RPMs servo?  Mine isn't.  It's got a big ol' lift cylinder.

[Prosperi-Tees]

So is the chopper downward pressure still controlled by air? And the stroke is electric? I think I am confusing myself.

[Gilligan]

That's correct Gerry.  Up and down is air but the back and forth is via motor.

[Binkspot]

Word on the street is the brand MX was a complete disaster. Not from the lift yet but other index issues. Fat Bobby thing.
Brand PX the big ones have a servo lift that works quite well.
Yes Anatol has the Vindicator and he Volt.
I wonder if they make servo mattress springs for better support?

Sorry for the two brand X but figure you can figure which is which.

[GraphicDisorder]

Word on the street is the brand MX was a complete disaster. Not from the lift yet but other index issues. Fat Bobby thing.
Brand PX the big ones have a servo lift that works quite well.
Yes Anatol has the Vindicator and he Volt.
I wonder if they make servo mattress springs for better support?

Sorry for the two brand X but figure you can figure which is which.

Shocker lol.

[ScreenPrinter123]

Just passed 200k prints on MX with no problems..I would even call Mariusz up and buy again if we became a two press shop.  It is a great press believe it or not.  Now the salesman?...the fact that he is no longer selling them should be all you need to know.  That is about all I will say without opening up a can of worms that would only be valuable for popcorn eating and bug eyed emoticons (something that TSB smartly tries to avoid--something I appreciate).